[W7 撥放王者] PotPlayer 將領風騷
- 主題發起人 princewang8
- 開始日期
jamesfuh
榮譽會員
- 已加入
- 9/21/03
- 訊息
- 3,401
- 互動分數
- 3
- 點數
- 38
----------------------------------------------------------
[1.5.29120] 2011/07/22
----------------------------------------------------------
+ 添加虛擬 杜比/環繞/耳機 輸出
+ 添加用戶自定義 DVD導航/HDTV分離器 功能
+ 添加支持 AMR 音頻播放
+ 添加立體字幕輸出功能
- 在 MP4/MOV 中支持了EAC3
- 修正被誤識別為H.264 的 MPEG2 視頻
- 修正 GMA 4500 顯卡上H.264 使用 DXVA 問題
- 改善 WTV 文件播放能力
- 將安裝包改為 Unicode 編碼
- 修正某些 MP4/MOV 影片時間識別錯誤問題
- 改善 點播/HTTP流媒體 下載速度
- MPEG2 TS 分離器支持 AAC LATM 解析
- 修正 TV吧 視頻縮略圖顯示問題
- 修正可自由設置點播的分辨率
- 修正某些 LPCM 音頻低速播放問題
- 修正某些 AVI 文件反交錯出錯問題
- 修正某些 ACM Vorbis 壓縮格式無法播放問題
- 支持選用外部 ASF/FLV 源/分離器
- 修改 FFmpeg 多線程解碼處理方式
- 修正某些 MP4 文件無法播放文件
- 修正無法在畫面頂部輸出 madVR,HaaliVR 消息問題
- 修正 GMA 新系列顯卡上H.264 DXVA 問題
- 改善 DXVA 解碼能力
- 修正對9位以上 H.264 視頻解碼問題
- 修正 CD-ROM 音頻 CD 播放問題
- 添加了對鼠標按鍵的可自定義指令功能
[1.5.29120] 2011/07/22
----------------------------------------------------------
+ 添加虛擬 杜比/環繞/耳機 輸出
+ 添加用戶自定義 DVD導航/HDTV分離器 功能
+ 添加支持 AMR 音頻播放
+ 添加立體字幕輸出功能
- 在 MP4/MOV 中支持了EAC3
- 修正被誤識別為H.264 的 MPEG2 視頻
- 修正 GMA 4500 顯卡上H.264 使用 DXVA 問題
- 改善 WTV 文件播放能力
- 將安裝包改為 Unicode 編碼
- 修正某些 MP4/MOV 影片時間識別錯誤問題
- 改善 點播/HTTP流媒體 下載速度
- MPEG2 TS 分離器支持 AAC LATM 解析
- 修正 TV吧 視頻縮略圖顯示問題
- 修正可自由設置點播的分辨率
- 修正某些 LPCM 音頻低速播放問題
- 修正某些 AVI 文件反交錯出錯問題
- 修正某些 ACM Vorbis 壓縮格式無法播放問題
- 支持選用外部 ASF/FLV 源/分離器
- 修改 FFmpeg 多線程解碼處理方式
- 修正某些 MP4 文件無法播放文件
- 修正無法在畫面頂部輸出 madVR,HaaliVR 消息問題
- 修正 GMA 新系列顯卡上H.264 DXVA 問題
- 改善 DXVA 解碼能力
- 修正對9位以上 H.264 視頻解碼問題
- 修正 CD-ROM 音頻 CD 播放問題
- 添加了對鼠標按鍵的可自定義指令功能
- 已加入
- 4/24/10
- 訊息
- 730
- 互動分數
- 0
- 點數
- 0
http://files.1f0.de/lavf/LAVFilters-video2.zip
This is the second "official" test version of LAV Video Decoder.
Changes since the first:
- Multi-Threaded decoding for H264, MPEG2, MPEG4, VP8, VP3/Theora, HuffYUV and DV (thats basically all formats ffmpeg offers multi-threading for)
- Fixed H264 in AVI
- Options to configure Multi-Threading, Stream Aspect Ratio, and which formats are active
- Alot more format support, including: MPEG1, DV, FLV1, VP6, SVQ3, H263, H261, Fraps, Theora, Indeo 3/5, Real Video 1/2/3, Bink Video
- Proper recovery for H264 after seeks, hopefully no artifacts anymore.
- Improved Output Format support for the "odd" renderers
- And a whole lot of other things.
If you're testing, please report any corruptions right after a seek or at the start of a file. Especially with H264!
The other formats are not specifically seek-proof yet, however i've really only ever seen alot of artifacting with H264.
Have fun testing!
This is the second "official" test version of LAV Video Decoder.
Changes since the first:
- Multi-Threaded decoding for H264, MPEG2, MPEG4, VP8, VP3/Theora, HuffYUV and DV (thats basically all formats ffmpeg offers multi-threading for)
- Fixed H264 in AVI
- Options to configure Multi-Threading, Stream Aspect Ratio, and which formats are active
- Alot more format support, including: MPEG1, DV, FLV1, VP6, SVQ3, H263, H261, Fraps, Theora, Indeo 3/5, Real Video 1/2/3, Bink Video
- Proper recovery for H264 after seeks, hopefully no artifacts anymore.
- Improved Output Format support for the "odd" renderers
- And a whole lot of other things.
If you're testing, please report any corruptions right after a seek or at the start of a file. Especially with H264!
The other formats are not specifically seek-proof yet, however i've really only ever seen alot of artifacting with H264.
Have fun testing!
- 已加入
- 4/24/10
- 訊息
- 730
- 互動分數
- 0
- 點數
- 0
- 已加入
- 4/24/10
- 訊息
- 730
- 互動分數
- 0
- 點數
- 0
了解 ^^ A4U 就很多這種的......:PPP:
Mr. TAS 還沒更新就更一下! 我想你應 updated 了
http://madshi.net/madVR.zip
Code:
madVR v0.69
* added support for all primaries referenced by h264, VC-1, MPEG2 and MS
* added support for all decoding matrices referenced by h264, VC-1, MPEG2 & MS
* primaries, matrix and range are now read from VC-1, MPEG2 and h264 headers
* ffdshow RGB output levels are now automatically detected and handled properly
* added support for primary, matrix and range info via DirectShow media type
* improved primary and matrix guesses, if no detailed information is available
* primaries, matrix and range are auto set to what the source requires
* VC-1, MPEG2, h264 headers are read from external decoders, without their help
* Ctrl+Alt+Shift+I toggles input levels (source = full range or not)
* added info to OSD about video bitstream and madVR raw video input formats
* improved internal decoder seeking behaviour
* video bitstream AR is used now if no container AR is available
* libav decoder is now automatically used if Intel decoder can't handle a file
* Intel decoder is now automatically used for interlaced VC-1 content
* fixed: some new problems with external decoders, introduced in v0.67
* fixed: crashes with Intel decoder during playback or when seeking
* fixed: libav/ffmpeg decoder crashed with full_range h264 videos
* fixed: bad timestamps with internal libav/ffmpeg decoder
* fixed: libav/ffmpeg VC-1 decoder showed corruption at the bottom of the image
* fixed: graphical corruption with internal decoders in certain situations
* fixed: connection to 4:2:2 h264 streams is now declined
- 已加入
- 4/24/10
- 訊息
- 730
- 互動分數
- 0
- 點數
- 0
TAS
"人"生淫家...
- 已加入
- 3/16/09
- 訊息
- 4,101
- 互動分數
- 37
- 點數
- 48
