Asus Commando如何上533以上 1:1的基本概念

[infin]

Thanks for the information. After trying for the whole day, the best I can get is 3150 (9x350) 6 hours stable on Orthos 50c on core temp 0.94. But after i quit Orthos, windows reboots ;smash;

Looks like my E4300 (Q641A278) is not a very good one. :lkl:

 

[abide-rsr]

小弟先來po一下commando的的基本設定
先說抱歉,只好原文po出
因為super pi那篇文章有很多要做解釋!!
超頻是國際共通語言...大家程度都不錯
忍耐一下吧

測試會晚點貼:D

I just got this board and have it go through some time.
It's quite a nice board and easy to get on high...

多谢分享好文，可e文不是十分懂的说，

偶也败了这个板，性能还可以，什么都不调，500就可以 开机，可有个问题偶很头痛，想请教大大，用GIGABYTE i-ram组raid 0 开机时都要停顿3分钟左右。不知道是什么原因？？

想换Striker Extreme NV680i
不知道有没有同样的问题，这2块板，在大大看来，哪个更好用一点？？;face12;

 

[287381906]

有一點倒是很重要
NV北橋同時有負責時脈產生的功能
所以你每調一次時脈,bios就會寫一次
所以nv板子bios很脆弱
一定要小心為上
而且當你在調fsb/memory時盡量把你調的跟板子所對應實際頻率相符
會比較好哦!!...

......狂爷的意思.....就是680i不需要时钟发生器？？而且BIOS的信息不是存在南桥的寄存器中吗？POST-on是去读取SB中的信息，就可以跳过CMOS了，那么与为什么修改NB的频率会令BIOS刷写？这个问题在NF2时代就很困扰我了....还请狂爷明示
PS：叫“爷”属于尊称，就类似日语里面的XXさま（撒嘛），你就是狂撒嘛了！哈哈！

 

[infin]

;em25; With a little bit of luck, i get it working at 367x9 @1.6v

 

[287381906]

GOOD JOB ！but the volt ....

 

[287381906]

how about default volt ? could it work at 3.2GHz ?

 

[infin]

I don't know whether I had a bad board or cpu...stock voltage can't even get up to 3.0Ghz, 333x9 need 1.4v on bios, but it is very cool, core temp around 40c under full load.
And like Coolaler said, temp roar when it reach 3.3+, full load temp around 60c ;ranger;

 

[287381906]

emm.....that may be the reason why intel set X6800 @ 2.93GHz.....
with the air way , core2 series can work @ <=3.0GHz stablely...... @_@

 

[287381906]

狂爷来教教我啊~~~

......狂爷的意思.....就是680i不需要时钟发生器？？而且BIOS的信息不是存在南桥的寄存器中吗？POST-on是去读取SB中的信息，就可以跳过CMOS了，那么与为什么修改NB的频率会令BIOS刷写？这个问题在NF2时代就很困扰我了....

 

[287381906]

看看680I的公版好像还真的没有时钟发生器，不过刷写的问题还是不明白........