Asus Commando如何上533以上 1:1的基本概念

[狂少]

屌!!這就很了不起嚕
那難怪我也一直有問題!!

感謝你嚕!

 

[hyde211]

屌!!這就很了不起嚕
那難怪我也一直有問題!!

感謝你嚕!

別這麼說啦！哈哈;em28;

 

[deskpcmail]

= =+看來這數值~~我去參考一下

 

[hihiggkinglee]

感謝分享11

 

[infin]

Help...

I just got this board, and I am using it with E4300, the best I can get is 333x9 stable (FSB 1.4v, Core 1.4v) using tower 120, what is the normal/max voltage of the nb and sb I can set ? Thanks for any help or hints ;rr;

 

[S-03]

小弟先來po一下commando的的基本設定
先說抱歉,只好原文po出
因為super pi那篇文章有很多要做解釋!!
超頻是國際共通語言...大家程度都不錯
忍耐一下吧

測試會晚點貼:D

I just got this board and have it go through some time.
It's quite a nice board and easy to get on high...

剛注冊就看到狂少大大的威力 可是看不到圖;smash;
我也剛買了commando
怎才能夠看到圖片?

 

[aaug1232001]

謝狂少分享,可活用了

 

[狂少]

;em25;

剛注冊就看到狂少大大的威力 可是看不到圖;smash;
我也剛買了commando
怎才能夠看到圖片?

美國因為某些州暴風雪
network都掛了
我會盡快補

 

[狂少]

I just got this board, and I am using it with E4300, the best I can get is 333x9 stable (FSB 1.4v, Core 1.4v) using tower 120, what is the normal/max voltage of the nb and sb I can set ? Thanks for an...

ok, here are some basic concept:

this board is quite decent as it can do as followed:

1. 1.60~1.675v for 500~533 fsb
2.Vcore up to 1.8v if you do vdroop fix mod

if you are talking about e4300, than think about you jump up from 200mhz to 333mhz is a little bit too low voltage compare with normal user 's 266 jump up almost 533 or even 533 by using 1.65~1.70v

do it step by step , add small amount each time, do not jump too much.


Good luck;)

 

[S-03]

;em25;

美國因為某些州暴風雪
network都掛了
我會盡快補

感恩
400*9 現在在找最穩電壓...找到可是溫度去到42 跑orthos 60度 本人用水冷的
fsb termination voltage跟cpu溫度有關係的嗎?