- 已加入
- 4/30/09
- 訊息
- 162
- 互動分數
- 0
- 點數
- 0
CPU:QuadCore Intel Core i5 750, 3600 MHz (18 x 200)
RAM: G Skill F3-16000CL9-2GBTD 2*2 GB
主板:MSI P55-GD80 (MS-7581)
硬碟:磁碟機 #1 - WDC WD5000AAKS-00V1A0
磁碟機 #2 - WDC WD6400AAKS-00H2B0
顯卡:MSI 5870公版 驅動程式版本 8.782.1.0
OS:6.1.7600 (Win7 RTM)
以下三次藍幕狀況都是開機後不到十分鐘發生(我習慣開機後更新病毒碼及掃描 Hinet PC-cillin)
第一次
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: tcpip.sys
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0x0000000000000020, 0x0000000000000002, 0x0000000000000000,
0xfffff88001872d70)
*** tcpip.sys - Address 0xfffff88001872d70 base at 0xfffff88001800000 DateStamp
0x4c15a458
第二次
The problem seems to be caused by the following file: SCSIPORT.SYS
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001144eba)
*** SCSIPORT.SYS - Address 0xfffff88001144eba base at 0xfffff88001140000 DateStamp
0x4a5bcac0
第三次
The problem seems to be caused by the following file: SCSIPORT.SYS
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001004eba)
*** SCSIPORT.SYS - Address 0xfffff88001004eba base at 0xfffff88001000000 DateStamp
0x4a5bcac0
請問各位大大~~到底哪裡出問題啊@@?
RAM: G Skill F3-16000CL9-2GBTD 2*2 GB
主板:MSI P55-GD80 (MS-7581)
硬碟:磁碟機 #1 - WDC WD5000AAKS-00V1A0
磁碟機 #2 - WDC WD6400AAKS-00H2B0
顯卡:MSI 5870公版 驅動程式版本 8.782.1.0
OS:6.1.7600 (Win7 RTM)
以下三次藍幕狀況都是開機後不到十分鐘發生(我習慣開機後更新病毒碼及掃描 Hinet PC-cillin)
第一次
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: tcpip.sys
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0x0000000000000020, 0x0000000000000002, 0x0000000000000000,
0xfffff88001872d70)
*** tcpip.sys - Address 0xfffff88001872d70 base at 0xfffff88001800000 DateStamp
0x4c15a458
第二次
The problem seems to be caused by the following file: SCSIPORT.SYS
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001144eba)
*** SCSIPORT.SYS - Address 0xfffff88001144eba base at 0xfffff88001140000 DateStamp
0x4a5bcac0
第三次
The problem seems to be caused by the following file: SCSIPORT.SYS
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001004eba)
*** SCSIPORT.SYS - Address 0xfffff88001004eba base at 0xfffff88001000000 DateStamp
0x4a5bcac0
請問各位大大~~到底哪裡出問題啊@@?