可怕的藍幕出現了!!!

tcstar22

一般般會員
已加入
4/30/09
訊息
162
互動分數
0
點數
0
CPU:QuadCore Intel Core i5 750, 3600 MHz (18 x 200)

RAM: G Skill F3-16000CL9-2GBTD 2*2 GB

主板:MSI P55-GD80 (MS-7581)

硬碟:磁碟機 #1 - WDC WD5000AAKS-00V1A0
   磁碟機 #2 - WDC WD6400AAKS-00H2B0

顯卡:MSI 5870公版 驅動程式版本 8.782.1.0

OS:6.1.7600 (Win7 RTM)

以下三次藍幕狀況都是開機後不到十分鐘發生(我習慣開機後更新病毒碼及掃描 Hinet PC-cillin)

第一次

A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: tcpip.sys

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000d1 (0x0000000000000020, 0x0000000000000002, 0x0000000000000000,
0xfffff88001872d70)

*** tcpip.sys - Address 0xfffff88001872d70 base at 0xfffff88001800000 DateStamp
0x4c15a458



第二次

The problem seems to be caused by the following file: SCSIPORT.SYS

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001144eba)

*** SCSIPORT.SYS - Address 0xfffff88001144eba base at 0xfffff88001140000 DateStamp
0x4a5bcac0


第三次


The problem seems to be caused by the following file: SCSIPORT.SYS

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x000000d1 (0xffffffffffffff8d, 0x0000000000000002, 0x0000000000000001,
0xfffff88001004eba)

*** SCSIPORT.SYS - Address 0xfffff88001004eba base at 0xfffff88001000000 DateStamp
0x4a5bcac0


請問各位大大~~到底哪裡出問題啊@@?
 

rzzsr

初級會員
已加入
12/30/10
訊息
19
互動分數
0
點數
0
第一次Blue Screen是tcpip.sys出問題
推測是有使用了號稱能解決win連線數限制的程式,win7不用這種東西
用win安裝光碟片到"I386"資料夾裡面找到"tcpip.sy_"這個檔案
然後解開到"C:\Windows\System32\Drivers\"目錄裡面把原本的"tcpip.sys"給蓋掉

第二三次Blue Screen是Scsiport.sys有問題
是不是有用了虛擬光碟如酒精or Daemon tool之類的程式
可能是安裝的時候驅動程式有問題
看看是不是uninstall程式再找個新版本重安裝看看

你的問題看起來都是驅動的問題,安裝程式時要注意版本的問題
 
最後編輯:
▌延伸閱讀