A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: halmacpi.dll
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x01000018, 0x00000002, 0x00000000, 0x81e1e9e9)
*** halmacpi.dll - Address 0x81e1e9e9 base at 0x81e1a000 DateStamp 0x4a5bbf07
這是用程式把藍天畫面還源得到的文字
不知道為啥
每次都會出現這問題
好像是下載速度太高吧
可是我用NETLIMITER限速也是會出現這問題
只是沒那麼快跳藍色畫面
想請問誰知道這是哪裡出問題
P.S.DLL檔更新無效
to your computer.
The problem seems to be caused by the following file: halmacpi.dll
IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000000a (0x01000018, 0x00000002, 0x00000000, 0x81e1e9e9)
*** halmacpi.dll - Address 0x81e1e9e9 base at 0x81e1a000 DateStamp 0x4a5bbf07
這是用程式把藍天畫面還源得到的文字
不知道為啥
每次都會出現這問題
好像是下載速度太高吧
可是我用NETLIMITER限速也是會出現這問題
只是沒那麼快跳藍色畫面
想請問誰知道這是哪裡出問題
P.S.DLL檔更新無效
