TRIM功能強化 ADATA FW 5.0.7a (附有韌體更新教學)

[cleverandy]

最新釋出的FW (28/3/23發佈)

FW版本:Firmware 5.0.7a
此FW適用於以下型號的ADATA SSD
ADATA SSD (SX910/SX900/SP900/SP800/S511/S510/S396)

下載地址:(請先選回你的型號)
http://tw.adata-group.com/index. ... t_driver&lan=tw
請每次只更新一隻SSD,也不要在RAID狀態下進行更新,不然更新工具是不能正常辨識你的SSD

1)請先下載 Firmware Upgrade Tool 和最新版本的 Firmware 5.0.7a (下載前可能需先登入ADATA帳號)

2)然後將他們解壓縮
3)運行Firmware Upgrade Tool,並記下黃圈中的編號

4)勾選要更新的SSD
5)按下左下角的Update Firmware,並在先前下載和已解壓縮的Firmware 5.0.7a File中選取與紅圈的編號匹配的更新檔,再按開啟舊檔,以進行硬更新

6)之後便會開始更新,更新完成後,可以按多一次Rescan For Drives(黃圈位置) 以確認SSD FW已更新為 5.0.7a 版本(紅圈位置)

 

[chang34]

整份文件又看了一遍 還是沒看到官方說5.0.7有提升效能
Fixed a theoretically possible instance where an UECC on the flash media while
processing unaligned write commands that cannot be corrected by the ECC
engine and RAISE
TM
causes invalid data to be returned.
ChangeSectorSize Diagnostic Command may timeout if invalid arguments are
passed
4445
5.0.7.open-002 Formatting a RAID-1 Volume takes longer than expected with PMC Sierra BR-8
HBA
4720
5.0.7.open-003 Some platforms capable of supporting 6Gb SATA Drives from the chipset, but
designed for use with 3Gb SATA Drives have poor signal integrity which can lead to
occasional issues such as failure to wake from sleep, failure to negotiate at 6Gb
speeds, and dropped links
5917
5.0.7.open-004 Microsoft has introduced WHCK 2.0 for Windows 8 logo certification. TRIM
performance/latency test times do not currently adhere to the parameters in the
test suite on pre-release versions of Windows 8. Contact your LSI FCD
representative for continuous updates.
11438

Table 5. Known Open Issues Suitable for End User Communication
Release Issue ID Description
5.0.7.open_cust-001 Formatting a RAID-1 Volume takes longer than expected with PMC Sierra BR-8 HBA.
5.0.7.open_cust-002 Some platforms capable of supporting 6Gb SATA Drives from the chipset, but designed
for use with 3Gb SATA Drives have poor signal integrity which can lead to occasional
issues such as failure to wake from sleep, failure to negotiate at 6Gb speeds, and
dropped links.

 

[cc1]

我的sp900 是5.0.6,但是找不到一5.0.7有一樣的編號.....,

 

[cleverandy]

之前我見過有人在FACEBOOK問ADATA有關SX900的,ADATA當時回覆:
SX900共分兩批次, 20nm flash 版本的最新firmware是5.0.5c，而25nm flash版本的是5.0.7a
而且有時如果找不到,可以試下PM給ADATA FB FAN PAGE查詢一下,看看最新的釋出了沒有