SATA裝置非常不穩定... 是排線還是主機板問題?

[piliwind]

嗯...
但拆了8800GT後 , 硬碟是好了 ,
只是燒錄器還有問題 , 交換兩條排線使用結果也一樣

剛剛看到你燒錄機為V200S
好巧 跟我之前買的一樣
我也是買回去後 裝完發現常常會"突然停頓10秒"
拆機之後 發現SATA線彎了 用好之後 覺得還是怪怪的
硬碟感覺好像還是會有所停頓 (1.2秒 不知是不是心理作用)
於是拆機 把HD.燒錄機電源線分開接
然後再刷AD-7200S 發現問題解決了
至於是電源還是韌體問題 我就不知道了
http://lightwing.pixnet.net/blog/post/22494307 可以試看看
不過要記的備分V200S的韌體 我重灌時忘記備份了 現在網路上還找不到V200S的韌體

 

[peter88625]

真是棘手的問題 顯卡也拆了硬碟有好一點 可是光碟機卻沒解決....
要說500w的power撐不住的話那這個power也太遜了
或者是主機板....2個其中之一有問題的機會比較大~

這個power我在農曆年後一定會更換的了...
Jack Power...真後悔當初貪便宜買了這個 =[

打算買Corsair VX450W...

而且我在某個討論區看到這句...... ;em44;
以上沒有提及的牛, 請不要使用, 尤其以下:
099, Icute, Jack Power, GTR, MAXTRON(勁量牛) [永久不錄用!!]

剛剛看到你燒錄機為V200S
好巧 跟我之前買的一樣
我也是買回去後 裝完發現常常會"突然停頓10秒"
拆機之後 發現SATA線彎了 用好之後 覺得還是怪怪的
硬碟感覺好像還是會有所停頓 (1.2秒 不知是不是心理作用)
於是拆機 把HD.燒錄機電源線分開接
然後再刷AD-7200S 發現問題解決了
至於是電源還是韌體問題 我就不知道了
http://lightwing.pixnet.net/blog/post/22494307 可以試看看
不過要記的備分...

刷7200...這個其實在我換燒錄機前就打算做的了...
不過新版BinFlash加了保護 ,
不同的BIOS不給刷......
請問大大可不可以把你刷成功的那一版BinFlash PM給小弟?

另外 , SATA硬碟是使用獨立SATA 12V電源線 ,
燒錄機則使用轉接頭 ,
和系統碟(IDE的)共用一條12V ~

 

[peter88625]

嗯...不知道為甚麼剛剛又能刷了...
大大可以不用傳舊版BinFlash過來了 =]

 

[piliwind]

刷7200...這個其實在我換燒錄機前就打算做的了...
不過新版BinFlash加了保護 ,
不同的BIOS不給刷......
請問大大可不可以把你刷成功的那一版BinFlash PM給小弟?

另外 , SATA硬碟是使用獨立SATA 12V電源線 ,
燒錄機則使用轉接頭 ,
和系統碟(IDE的)共用一條12V ~

我記的我是用BinFlash 1.46現在最新版是1.46a
我覺得應該不會加保護吧 會不會你韌體真的給錯了
還有我韌體是用 http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7200A/

剛剛看一下 解釋 好像真的有保護
v1.46a - Fix flashing of firmwares that do not supply bootcode version

我搜尋一下電腦 看看有沒有保留 再找找免費空間

 

[peter88625]

我記的我是用BinFlash 1.46現在最新版是1.46a
我覺得應該不會加保護吧 會不會你韌體真的給錯了
還有我韌體是用 http://liggydee.cdfreaks.com/page/en/Optiarc-AD-7200A/

剛剛看一下 解釋 好像真的有保護
v1.46a - Fix flashing of firmwares that do not supply bootcode version

我搜尋一下電腦 看看有沒有保留 再找找免費空間

...小弟剛剛發文說能刷 ,
然後發現大大剛好在這時上線 ,
真是巧合 :PPP:

------

另外 ,刷成7200S後 ,
由DVD讀取807MB檔案至系統碟...正常 ;
由DVD讀取750MB檔案至RamDisk...正常 ;
由CD讀取XP SP2並制作623MB ISO檔然後存在RamDisk...正常 ;
由DVD讀取4.2GB檔案至系統碟...正常 ;

DVD9讀取測試明天補上

 

[peter88625]

DVD9 讀取
一切正常

----------------------------------------------------------------

 

[piliwind]

7200S 1.Z3好像不是最新韌體
也沒差拉 用的順就好

換完韌體後
問題就解決了
SONY韌體有問題? 不過看SONY也沒放出新韌體 真奇怪

 

[peter88625]

DVD-RAM 讀取及寫入
正常

 

[peter88625]

DVD+R DL寫入
失敗

以下是Nero的錯誤報告
--------------------------

Peter Lam

1K22-0867-0795-66M4-5086-7402-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.2.8.0
Internal Version: 8, 2, 8, 0

Recorder: <Optiarc DVD RW AD-7200S> Version: 1.Z3 - HA 1 TA 0 - 8.2.8.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <IBOBA 4TQZKTQ785 >Version: 1.03 - HA 1 TA 1 - 8.2.8.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22JHA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7200S atapi Port 2 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP2504C atapi Port 2 ID 1 DMA: On
CdRomPeripheral : IBOBA 4TQZKTQ785 1.03 ahso6tnn Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
Optiarc DVD RW AD-7200S F: CdRom0
IBOBA 4TQZKTQ785 H: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1520MB (1556776kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.1.2009
燒錄DVD映像檔
11:20:32 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:20:33 #2 Text 0 File Burncd.cpp, Line 3502
Turn on Disc-At-Once, using DVD media

11:20:33 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3688430 (819:39.05, 7203MB)

11:20:33 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

11:20:33 #5 Text 0 File DlgWaitCD.cpp, Line 2957
Recorder: Optiarc DVD RW AD-7200S, Media type: DVD+R DL
Disc Manufacturer ID: <RITEK>, Media Type ID: <S04>, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3

11:20:33 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:20:33 #7 Text 0 File ThreadedTransferInterface.cpp, Line 762
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM 模式 1)
2 indices, index0 (150) not provided
original disc pos #0 + 3688431 (3688431) = #3688431/819:39.6
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3688431 blocks [F: Optiarc DVD RW AD-7200S]
--------------------------------------------------------------

11:20:33 #8 Text 0 File ThreadedTransferInterface.cpp, Line 964
Prepare [F: Optiarc DVD RW AD-7200S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7553906688, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3688431 | 3688431 | 0x00
3688431 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:20:33 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:20:33 #10 Text 0 File Burncd.cpp, Line 4288
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:20:33 #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

11:20:33 #12 Text 0 File Burncd.cpp, Line 4407
Cache writing successful.

11:20:33 #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

11:20:33 #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)

11:20:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2681
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:20:33 #16 Text 0 File DVDPlusDualLayer.cpp, Line 580
Disc finalized, LBA total Image size: 3688431 (7203MB), Last LBA L0: 1844223 (3601MB)

11:20:42 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x0675bd40: Len x804

11:20:42 #18 Text 0 File DVDPlusDualLayer.cpp, Line 745
L0 Data Zone Capacity set to 1844224 (1C2400h, 3602MB) -> OK, confirmed setting

11:20:42 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 772
Burning Layer 1

11:20:42 #20 Text 0 File DVDPlusDualLayer.cpp, Line 782
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

11:20:42 #21 Text 0 File Cdrdrv.cpp, Line 10140
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Physical Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Twin Format Flag: 0
Media Specific [16..783]:
00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.%i:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
E1 0F 32 10 00 03 00 00 - 00 FC FF FF 00 22 D7 FF ..2.........."..
00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@
25 25 37 15 00 34 6E 00 - 34 6E 1A 1A 0C 0C 0E 0E %%7..4n.4n......
00 00 00 10 00 1A 1A 0C - 0C 0E 0E 00 00 00 10 00 ................
04 00 33 7B 5C 00 33 66 - 40 19 10 05 04 10 00 00 ..3{\.3f@.......
00 00 00 55 6A 32 24 16 - 09 08 20 00 00 00 00 05 ...Uj2$.........
84 00 00 48 6E 28 24 16 - 09 08 20 00 00 00 00 00 ...Hn($.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:20:42 #22 Text 0 File DVDR.cpp, Line 6853
Drive: Optiarc DVD RW AD-7200S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

11:20:42 #23 CDR -1207 File DVDR.cpp, Line 6557
Book Type automatically set to: DVD-ROM

11:20:42 #24 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

11:20:42 #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

11:32:12 #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 2113
Burning Layer 2

11:32:12 #27 Text 0 File DVDPlusDualLayer.cpp, Line 2122
Perform layer 1 to 2 jump before writing at address 1844224 (1C2400h)

11:32:59 #28 SPTI -1502 File SCSIPassThrough.cpp, Line 197
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
CDB Data: 0x2A 00 00 1D C2 80 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x0abedcc0: Len x10000
0xFE 2E 07 08 CB 73 30 BA 9C D9 A5 11 F9 4C CB 10
0x98 E6 D5 AE 9C 42 1F BF 7A 8C 15 A4 91 69 53 5E
0x78 7C 1A B4 4D B7 18 36 F9 1B 94 48 8C DC 34 7A

11:32:59 #29 CDR -1502 File Writer.cpp, Line 306
DMA-driver error, CRC error
F: Optiarc DVD RW AD-7200S

11:44:55 #30 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1950336

11:44:55 #31 Text 0 File DVDR.cpp, Line 6853
Drive: Optiarc DVD RW AD-7200S
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

11:44:55 #32 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5,540 KB/s)

11:44:55 #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:44:55 #34 Text 0 File Cdrdrv.cpp, Line 11391
DriveLocker: UnLockVolume completed

11:44:55 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

[peter88625]

目前燒錄器讀取正常 ,
但DVD9還是不能燒錄

至於硬碟還是有問題