[OPB攪怪系列IV]你還在等Rampage Formula喔,來,狂少教你如何把你的Maximus Formula變身成Rampage Formula
- 主題發起人 狂少
- 開始日期
Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [500]
FSB Strap to North Bridge [Auto]
PCIE Frequency [110]
DRAM Frequency [DDR2-1000MHz]
DRAM Command Rate [Auto]
DRAM CMD Skew on Channel A [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on Channel A [Auto]
DRAM CLK Skew on Channel B [Auto]
DRAM Timing Control [Manual]
CAS# Latency [4]
RAS# to CAS Delay [4]
RAS# Precharge [4]
RAS# Active Time [12]
RAS# To Ras# Delay [3]
Row Refresh Cycle Time [35]
Write Recovery Time [6]
Read To Precharge Time [3]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [4]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Strong]
Transaction Booster [Auto]
Boost Level [0]
CPU Voltage [1.55000v]
CPU PLL Voltage [Auto]
North Bridge Voltage [1.69v]
DRAM Voltage [2.35v]
FSB Termination Voltage [1.5v]
South Bridge Voltage [1.075v]
SB 1.5V Voltage [1.50v]
Loadline Calibration [Enabled]
CPU GTL Reference [0.63x]
North Bridge GTL Reference [0.67x]
DDR2 Controller REF Voltage [DDR2_REF]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
Elton523
最愛魚寶貝
- 已加入
- 10/12/06
- 訊息
- 810
- 互動分數
- 0
- 點數
- 16
我的RF剛好就是星期三到貨～;em25;
要去打X典的屁屁啦～報價比啞虎購物中心還貴...居然報十二張小朋友～;oq;
明天終於可以領到板子...我的E8400終於有新家嚕～;tongue;
可以! 才剛刷過來 ;em03;
有幾個 sensor 訊號異常, 其他重要參數都沒問題, 可以找找其他人的經驗, 問題雖比 MF -> RF 多, 但都是些小問題, 不影響爽度 :D
最後編輯：
相關的主題
