- 已加入
- 9/18/03
- 訊息
- 14,397
- 互動分數
- 2
- 點數
- 0
狂少在日前知悉有某論壇提出狂少多年來所研究之super pi結果是偽造;
在朋友勸說下,由一位德國power user根據日本Hideo先生(感謝)的心得加上狂少的CDT-I
我貼在CBB的原著..很抱歉,時間過久,有些圖真的不見(硬碟毀損+server不穩)
http://forum.coolaler.com/showthread.php?t=164700
及CDT-IV所編寫完成.
狂少這軟體不是要來誇耀我多強,只是要讓人知道,別人研究多年的苦心到底在那
我曾經跟c大說過,等這軟體有點規模就會分享給CBB所有會員
現在大家也終於有這軟體可用,請不要再對狂少的super pi產生懷疑
我知道這是很難相信.但我說過...在一種專業的鑽研中
你不懂或你做不到..不代表別人跟你一樣.如果你只是想著,你最強
那你不行,別人也不行..那我可以跟你說,就算你到你一生終了,也是不行.
這個校調軟體,不是你單跑了它就有用
它只是替你節省很多很複雜的時間和步驟
有研究過狂少CDT, CDT-IV理論的超頻者;都知道要事前準備很多時間
甚至run CDT還可以測試出你系統穩定與否
因為CDT很重系統硬碟partition與partition之間的平衡;
就是應用這種原理來加大系統的有效memory還有快取
進而增進記憶體的讀寫效能
在玩這套軟體之前,有幾個條件:
1.一定要乾淨的系統
2.要校調一下註冊表,也就是很多power user之間流傳的OPBspiregtweak.reg
原始資料在此:
**兩個檔:一定,千萬要把這兩個檔放在同一個資料夾
第一個存成bat(虛線之間)
----------------------------------------------------------------------
@echo off
reg add HKLM\SYSTEM\CurrentControlSet\Services\upnphost /v start /t REG_DWORD /d 4 /f
reg add HKLM\SYSTEM\CurrentControlSet\Services\SSDPSRV /v start /t REG_DWORD /d 4 /f
Rundll32.exe advapi32.dll,ProcessIdleTasks
net stop "dhcp client"
net stop "dns client"
net stop "ipsec services"
net stop "task scheduler"
net stop "application layer gateway service"
net stop "automatic updates"
net stop "system event notification"
net stop "com+ event system"
net stop "computer browser"
net stop "cryptographic services"
net stop "distributed link tracking client"
net stop "error reporting service"
net stop "fast user switching compatibility"
net stop "help and support"
net stop "hid input service"
net stop "logical disk manager"
net stop "usnsvc"
net stop "network location awareness (nla)"
net stop "print spooler"
net stop "protected storage"
net stop "remote access connection manager"
net stop "remote registry"
net stop "secondary logon service"
net stop "security center"
net stop "server"
net stop "shell hardware detection"
net stop "ssdp discovery service"
net stop "system restore service"
net stop "tcp/ip netbios helper"
net stop "telephony"
net stop "terminal services"
net stop "themes"
net stop "webclient"
net stop "windows audio"
net stop "windows firewall/internet connection sharing (ics)"
net stop "windows time"
net stop "wireless zero configuration"
net stop "workstation"
start opbtweak.reg--------------------------------------------------------------------------------
第2檔就是註冊表的校調:請存成 opbtweak.reg
--------------------------------------------------------------------------
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer]
"AlwaysUnloadDLL"="1"
[HKEY_CURRENT_USER\Control Panel\desktop]
"AutoEndTasks"="1"
"HungAppTimeout"="5000"
"MenuShowDelay"="400"
"WaitToKillAppTimeout"="4000"
"WaitToKillServiceTimeout"="4000"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000001
"NtfsDisableLastAccessUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=1
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters]
"EnableSuperfetch"=dword:00000001
"EnablePrefetcher"=dword:00000003
------------------------------------------------------------------------------
當然還有maxmem的校調
請在boot.ini的這一行最後加上 /maxmem=576
576是MB,當然多少最好是端看你自己去測
我是576~616最適合我:
看起來會是這樣:
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /maxmem=576
*******************************************************************************
msconfig中的診斷式啟動:
如果你要單純研究super pi,那你的windows模式很重要
你把windows load一堆防毒防木馬..又來個看片的啥效果
那你的windows真是多采多姿..怎跑?
所以在開始---執行,打入msconfig,馬上就會看到
"系統設定公用程式"--->一般--->再選診斷式啟動
然後重開機
***************************************************************
以上骨架完成,你基本上就可以run所謂的OCX spi tweaker
這些就是狂少多年來研究的成果
如今我已經盡我能力帶大家進門
成功與否,我不能負責
但請諸位如果成功達成你覺得你要達成的目標
也請給狂少一點狂少應得的鼓勵與認可
我不是神人..我也不用胡說八道
我只是下的功夫比別人多
我super pi跑的比別人快
也是要感謝C大與我認識多年來的一起奮鬥和研究
在此我懷著感恩的心
特別把這套理論貼在我在專業超頻領域中踏出第一步的home forum
我感謝大家支持我,我也感謝與尊敬C大對我的期許與寬容
謝謝大家
5年後回台灣,我一定會在大家面前當場解說
狂少頓首
以下就是狂少的spi tweaker的原出處與作者解說
請按我來download ocx spi tweaker
我真的很難把這原文翻成中文,保持專有原著說明也比較好
但是這並不是很難的英文
如果有網兄願意
請盡一份心力把它翻譯成中文解說************************************************************************************
軟體作者原文
原Link: http://www.ocxtreme.org/forumenus/showthread.php?t=3469
Destiny of the Spi Tweaker can only be OCX.
I'm very proud that guys like OPB & joe_cool support this application and i hope
in the future we can together improve the performance of this utility.
All suggestions are welcome.
This is the first OCX-Release and i hope you like it.
I think the main advantage of this software is that you can easy test different COPY-Waza
Settings.
Not every System is equal to others and there are many Parameters that affect SuperPI 32M
calculation time like Waza size, MAXMEM, Partition size , Pagefile size & location.
Selectable Waza & single file size can help to find the most best Parameters for your
system.
Second benefit will be the ability to run a Copy Waza easy with only one click , i think
it should help especially on LN2 :D :)
How it works ?
The Utility do the well known copy waza as follows :
1. create a folder "waza" on the second partition (you can select the partition on the
GUI)
2. create 8 subfolders 0....7 ( Example d:\waza\0 ...... d:\waza\7 )
3. create in each subfolder some single files (waza0.tmp .....wazaxxxx.tmp ) , file count
depends on Waza Size & single file size.
Waza Size * 1024 / single file size = count
Example : 480 MB * 1024 / 128 Kb = 3840 files
Than each subfolder contains 3840 / 8 -> 480 Files
4. The next step is to copy whole Waza folder from second to super pi partition
(selectable on the GUI)
5. if you have checked "CDT" Checkbox than the copy process between the partitions will
be as follows :
second -> pi -> second -> pi
6. The Clean Button run a system clean procedure that removes *.tmp , *.log and other
garbage files on the system also known as "OPB Cleaner" :)
7. The "Burn" Button when clicked produces CPU-Load by making simple FPU division should
also help on LN2 to avoid cold bug.
Have fun ! and fast Spi32M times :)
Update 5.7.2008 Version 1.0.1
Changelog :
- optimize waza single file creating performance
Update 6.7.2008 Version 1.0.2
Changelog :
- add another checkbox for CDT IV
attention ! ,CDT IV could take a lot time
- add donate button (paypal)
******************************************************************************************
在朋友勸說下,由一位德國power user根據日本Hideo先生(感謝)的心得加上狂少的CDT-I
我貼在CBB的原著..很抱歉,時間過久,有些圖真的不見(硬碟毀損+server不穩)
http://forum.coolaler.com/showthread.php?t=164700
及CDT-IV所編寫完成.
狂少這軟體不是要來誇耀我多強,只是要讓人知道,別人研究多年的苦心到底在那
我曾經跟c大說過,等這軟體有點規模就會分享給CBB所有會員
現在大家也終於有這軟體可用,請不要再對狂少的super pi產生懷疑
我知道這是很難相信.但我說過...在一種專業的鑽研中
你不懂或你做不到..不代表別人跟你一樣.如果你只是想著,你最強
那你不行,別人也不行..那我可以跟你說,就算你到你一生終了,也是不行.
這個校調軟體,不是你單跑了它就有用
它只是替你節省很多很複雜的時間和步驟
有研究過狂少CDT, CDT-IV理論的超頻者;都知道要事前準備很多時間
甚至run CDT還可以測試出你系統穩定與否
因為CDT很重系統硬碟partition與partition之間的平衡;
就是應用這種原理來加大系統的有效memory還有快取
進而增進記憶體的讀寫效能
在玩這套軟體之前,有幾個條件:
1.一定要乾淨的系統
2.要校調一下註冊表,也就是很多power user之間流傳的OPBspiregtweak.reg
原始資料在此:
**兩個檔:一定,千萬要把這兩個檔放在同一個資料夾
第一個存成bat(虛線之間)
----------------------------------------------------------------------
@echo off
reg add HKLM\SYSTEM\CurrentControlSet\Services\upnphost /v start /t REG_DWORD /d 4 /f
reg add HKLM\SYSTEM\CurrentControlSet\Services\SSDPSRV /v start /t REG_DWORD /d 4 /f
Rundll32.exe advapi32.dll,ProcessIdleTasks
net stop "dhcp client"
net stop "dns client"
net stop "ipsec services"
net stop "task scheduler"
net stop "application layer gateway service"
net stop "automatic updates"
net stop "system event notification"
net stop "com+ event system"
net stop "computer browser"
net stop "cryptographic services"
net stop "distributed link tracking client"
net stop "error reporting service"
net stop "fast user switching compatibility"
net stop "help and support"
net stop "hid input service"
net stop "logical disk manager"
net stop "usnsvc"
net stop "network location awareness (nla)"
net stop "print spooler"
net stop "protected storage"
net stop "remote access connection manager"
net stop "remote registry"
net stop "secondary logon service"
net stop "security center"
net stop "server"
net stop "shell hardware detection"
net stop "ssdp discovery service"
net stop "system restore service"
net stop "tcp/ip netbios helper"
net stop "telephony"
net stop "terminal services"
net stop "themes"
net stop "webclient"
net stop "windows audio"
net stop "windows firewall/internet connection sharing (ics)"
net stop "windows time"
net stop "wireless zero configuration"
net stop "workstation"
start opbtweak.reg--------------------------------------------------------------------------------
第2檔就是註冊表的校調:請存成 opbtweak.reg
--------------------------------------------------------------------------
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer]
"AlwaysUnloadDLL"="1"
[HKEY_CURRENT_USER\Control Panel\desktop]
"AutoEndTasks"="1"
"HungAppTimeout"="5000"
"MenuShowDelay"="400"
"WaitToKillAppTimeout"="4000"
"WaitToKillServiceTimeout"="4000"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000001
"NtfsDisableLastAccessUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=1
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters]
"EnableSuperfetch"=dword:00000001
"EnablePrefetcher"=dword:00000003
------------------------------------------------------------------------------
當然還有maxmem的校調
請在boot.ini的這一行最後加上 /maxmem=576
576是MB,當然多少最好是端看你自己去測
我是576~616最適合我:
看起來會是這樣:
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /maxmem=576
*******************************************************************************
msconfig中的診斷式啟動:
如果你要單純研究super pi,那你的windows模式很重要
你把windows load一堆防毒防木馬..又來個看片的啥效果
那你的windows真是多采多姿..怎跑?
所以在開始---執行,打入msconfig,馬上就會看到
"系統設定公用程式"--->一般--->再選診斷式啟動
然後重開機
***************************************************************
以上骨架完成,你基本上就可以run所謂的OCX spi tweaker
這些就是狂少多年來研究的成果
如今我已經盡我能力帶大家進門
成功與否,我不能負責
但請諸位如果成功達成你覺得你要達成的目標
也請給狂少一點狂少應得的鼓勵與認可
我不是神人..我也不用胡說八道
我只是下的功夫比別人多
我super pi跑的比別人快
也是要感謝C大與我認識多年來的一起奮鬥和研究
在此我懷著感恩的心
特別把這套理論貼在我在專業超頻領域中踏出第一步的home forum
我感謝大家支持我,我也感謝與尊敬C大對我的期許與寬容
謝謝大家
5年後回台灣,我一定會在大家面前當場解說
狂少頓首
以下就是狂少的spi tweaker的原出處與作者解說
請按我來download ocx spi tweaker
我真的很難把這原文翻成中文,保持專有原著說明也比較好
但是這並不是很難的英文
如果有網兄願意
請盡一份心力把它翻譯成中文解說************************************************************************************
軟體作者原文
原Link: http://www.ocxtreme.org/forumenus/showthread.php?t=3469
Destiny of the Spi Tweaker can only be OCX.
I'm very proud that guys like OPB & joe_cool support this application and i hope
in the future we can together improve the performance of this utility.
All suggestions are welcome.
This is the first OCX-Release and i hope you like it.
I think the main advantage of this software is that you can easy test different COPY-Waza
Settings.
Not every System is equal to others and there are many Parameters that affect SuperPI 32M
calculation time like Waza size, MAXMEM, Partition size , Pagefile size & location.
Selectable Waza & single file size can help to find the most best Parameters for your
system.
Second benefit will be the ability to run a Copy Waza easy with only one click , i think
it should help especially on LN2 :D :)
How it works ?
The Utility do the well known copy waza as follows :
1. create a folder "waza" on the second partition (you can select the partition on the
GUI)
2. create 8 subfolders 0....7 ( Example d:\waza\0 ...... d:\waza\7 )
3. create in each subfolder some single files (waza0.tmp .....wazaxxxx.tmp ) , file count
depends on Waza Size & single file size.
Waza Size * 1024 / single file size = count
Example : 480 MB * 1024 / 128 Kb = 3840 files
Than each subfolder contains 3840 / 8 -> 480 Files
4. The next step is to copy whole Waza folder from second to super pi partition
(selectable on the GUI)
5. if you have checked "CDT" Checkbox than the copy process between the partitions will
be as follows :
second -> pi -> second -> pi
6. The Clean Button run a system clean procedure that removes *.tmp , *.log and other
garbage files on the system also known as "OPB Cleaner" :)
7. The "Burn" Button when clicked produces CPU-Load by making simple FPU division should
also help on LN2 to avoid cold bug.
Have fun ! and fast Spi32M times :)
Update 5.7.2008 Version 1.0.1
Changelog :
- optimize waza single file creating performance
Update 6.7.2008 Version 1.0.2
Changelog :
- add another checkbox for CDT IV
attention ! ,CDT IV could take a lot time
- add donate button (paypal)
******************************************************************************************
