Msi K8n Neo2 Platinum Bios

kibtseng

進階會員
已加入
12/9/04
訊息
306
互動分數
0
點數
0

on99

初級會員
已加入
10/30/03
訊息
33
互動分數
0
點數
0
v. 1.A modified by sideeffect

7025rev1.rar
- Based on 1.A Official
- Default trc = 12 clks & trfc = 18 clks on boot
- Enabled 183 divider
- Enabled 150 Divider
- Enabled S.M.A.R.T by default
- Disabled Temps from showing in bios
- Disabled 216, 233, 250 dividers
- Disabled ATI/Nvidia Speedup
- Disabled Auto overclocking options
- Disabled Full screen logo and small EPA logo
- Disabled Fast writes by default


7025rev2.rar
- Based on 1.A Official
- Default trc = 12 clks & trfc = 18 clks on boot
- Max Async = 8
- Read Write Queue bypass = 16
- Bypass max = 7
- Enabled 183 divider
- Enabled 150 Divider
- Enabled S.M.A.R.T by default
- Disabled Temps from showing in bios
- Disabled 216, 233, 250 dividers
- Disabled ATI/Nvidia Speedup
- Disabled Auto overclocking options
- Disabled Full screen logo and small EPA logo
- Disabled Fast writes by default
 

chingchang

進階會員
已加入
10/19/03
訊息
160
互動分數
0
點數
0
大家都偏愛哪一版呢??
 

on99

初級會員
已加入
10/30/03
訊息
33
互動分數
0
點數
0
v. 1.A modified by sideeffect

Ballistix Edition

After extensive testing with athlon 64 tweaker and my Crucial Tracer Ballistix. I found these to be the most stable memory settings. These settings helped me out greatly and make a huge difference to stability.

- Max Async = 8
- Read Write Queue bypass = 16
- Bypass max = 7
- Idle Cycle limit = 64
- DQS Skew Mode = slower


TCCD Edition
Tested by CD1986 with TCCD ram to find most stable timings at maximum mhz. Tried DQS Skew faster slower and off also tested DQS Skew at 255 but the most stable timings were similar to the ballistix but with idle cycle limit at 256.

- Max Async = 8
- Read Write Queue bypass = 16
- Bypass max = 7
- Idle Cycle limit = 256
- DQS Skew Mode = slower
- Drive Strength weak by default
 

kibtseng

進階會員
已加入
12/9/04
訊息
306
互動分數
0
點數
0
版本那麼多
不知那一版對各位的超頻比較有幫助
 

buniro

高級會員
已加入
11/25/04
訊息
970
互動分數
0
點數
16
Originally posted by kibtseng@Aug 29 2005, 09:12 AM
版本那麼多
不知那一版對各位的超頻比較有幫助
我也很想知道該用哪一版好?
上面這幾版到底是差在哪裡呢?
:unsure:
 

nc880403

一般般會員
已加入
3/1/05
訊息
171
互動分數
0
點數
16
我用過這版之後覺得不好用尤其是玩戰2時都會跳出桌面再換回1.9版就不會了,給大家做各參考
 

kibtseng

進階會員
已加入
12/9/04
訊息
306
互動分數
0
點數
0

on99

初級會員
已加入
10/30/03
訊息
33
互動分數
0
點數
0
v. 1.B4 modified by sideeffect
7025B4.rar

- Based on 1.B4 Beta

- Enabled 183 divider
- Enabled 150 Divider
- Idle Cycle limit = 64
- Max Async = 8
- Read Write Queue bypass = 16
- Bypass max = 7

- Added New Full screen Boot logo
- All options available in bios will show.
- Nvidia lan on by default.
- Enabled Bios cachable by default

- Disabled 216, 233, 250 dividers
- Disabled ATI/Nvidia Speedup by default
- Disabled Sata ports 1 and 2 by default
- Disabled Full screen logo and small EPA logo by default
- Disabled Fast writes by default

This Bios will display Temperatures in bios. If you are booting at - degrees this can cause an issue.
 
▌延伸閱讀