我也用這棵.一樣的.倍頻有28.外頻拉到104.5成績跟XEON 2697 V3差不多21.5分.
轉檔超快.....但在使用AE宣染會出錯....要把超執行緒關掉才能正常.試過20核以下可宣染.28核不行.
目前還不知道原因....大大可以試試AE宣染跟我的情形一樣嗎?不知是軟體還是CPU的問題?
1920*1080模版.....1280的有時可以宣染.....但速度比關掉超執行緒還慢....掏寶買20000多很超值.比5820K超4.5G快很多....又低溫.全速都在60度上下.
沒截圖成績記錄.
COMMENT=MAXON CINEBENCH is based on the high performance animation and rendering software MAXON CINEMA 4D.
COMMENT=These are your MAXON CINEBENCH R11.5 results.
COMMENT=
COMMENT=Results Disclaimer - CINEBENCH results are indicative of overall system performance when using CINEMA 4D,
COMMENT=and do not necessarily reflect the performance of the tested hardware with other applications.
COMMENT=Performance of each component (processor, graphics card) does rely somewhat on other components in the system.
COMMENT=Results provided are typical, although not derived from specific testing procedures.
COMMENT=
CORES=14
LOGICALCORES=2
MHZ=2410.000000
PROCESSOR=Genuine Intel CPU
OPENGLVENDOR=NVIDIA Corporation
OPENGLCARD=GeForce GTX 680/PCIe/SSE2
OPENGLVERSION=4.5.0 NVIDIA 353.30
CBTYPE=64 Bit
OSVERSION=64 Bit, Enterprise Edition (build 9200)
CBCPU1=0.000000
CBCPUX=21.737949
CBOPENGL=0.000000
CBOPENGLQUALITY=0.000000
C4DINFO=
C4DVERSION=11.529
C4DBUILDID=RC23933demo