- 已加入
- 3/16/09
- 訊息
- 4,102
- 互動分數
- 37
- 點數
- 48
【軟體名稱】：DSL 網路最佳化工具 cFosSpeed v9.00 Build 2020 Final 多國語言版
【軟體語言】：多國語言
【軟體分類】：寬頻優化、軟體QoS
【運行環境】：Windows All(32 & 64 bit)
【檔案大小】：4.3 MB
【檔案類型】：RAR壓縮檔
【解壓密碼】：***回覆後可見***
【官方網頁】：http://www.cfos.de
cFosSpeed is a network driver, which attaches itself to existing Internet connections. It then optimizes data transfer by means of Traffic Shaping.Traffic Shaping is a method for optimizing the Internet traffic. It allows maximum speed while ensuring minimal Ping.
You can use cFosSpeed with a router and/or a DSL-modem or cable-modem. You can also use cFosSpeed with other types of Internet access, ie. whenever you already have an existing Internet connection.cFosSpeed supports a wide variety of connections, like DSL, cable, ISDN, UMTS, etc.
cFosSpeed是一款具有很多功能DSL modem和路由器驅動軟件,可以充分使用你的ISDN和DSL連接。
讓ADSL/VDSL上傳滿載時不會讓下載像龜爬：
cFosSpeed很多人在使用 P2P軟體或MSN傳檔時，常會感覺到網頁開啟速度變慢了，這是因為ADSL本身規格的因素，在上傳滿載時會拖慢下載速度。如果你也有這樣的困擾，就試試 cFosSpeed來幫你解決問題吧！很多人可能不知道，因為本身規格的因素，ADSL在上傳檔案達到滿載時會拖慢下載速度，導致網頁開啟速度變慢，甚至是無法開啟，特別是使用eDonkey、eMule 或 BT 這類軟體時感覺會特別明顯，上傳滿載下傳卻像龜爬，該怎麼辦呢？試試cFosSpeed吧，它獨特的「Traffic Shaping」技術可以解決這個問題！「Traffic Shaping」技術是一種網路封包排程技術，它會在ADSL上傳速度達到滿載時強迫系統調整頻寬，使用者可以自行調整程式的網路優先權，讓擁有高優先權的程式封包（例如瀏覽器、網路遊戲……等自己常用的程式），能擠進已被佔滿的傳輸頻寬中，以保持其連線通暢。如此一來，當使用者利用BT軟體同時上傳與下載檔案時，就不用怕上傳速度達到滿載而拖慢下載速度，可以正常地瀏覽網頁或玩遊戲了
程序特點：
－高級Traffic Shaping （通信量調整功能）；
－用於DSL 調制解調器和路由器；
－與通用的 PPPoE 驅動器兼容；
－自動識別路由器；
－自動校準；
－應答遊戲以及例如 eMule，Kazaa 等的對等網絡；
－可自由定義的優先級；
－禁撥高收費電話功能；
－通信量計數器及計時器；
－防火墻；
－時間同步；
－最優遠程數據通信網連接提高網速；
－智能識別不在使用中的連接等!
更新內容
-----------------------------------------
* New feature
+ Improvement
! Software change requires modification of your configuration
x Bugfix
- Information only
-----------------------------------------
cFosSpeed 9.00 Build 2020
* Re-vamped dialogs. They are now easier to use, faster and in the new
Window 8 style.
As part of the dialog re-vamp we changed the Traffic Analysis dialogs
so it is easier to use and consistent with the prioritization dialogs.
Instead of adding protocols/programs to slots, you now assign groups
as they appear in the prioritization dialogs. If you like to also
add individual programs or protocols, you can do so with spd commands.
* Added new filters -tx-lite, -rx-lite and -lite. The idea is to detect
"lite data streams", i.e. streams of data that are low volume and not bulk
data in nature.
+ Added "spd slot X get/set/add categories CAT1:CAT2:..." command. This will
set the slot X programs and protocols to all programs/protocols that are in
one the listed categories. A category is the text before the frist "," in
settings.ini/user.ini. Example: the line "gw2.exe=Games,Guild Wars 2" in
section [highprogs] puts the program "gw2.exe" in the category "Games".
+ Added "spd slot show" command to show all settings for all slots.
+ Added nettalk_tx, nettalk_rx and nettalk_max modes for slots.
+ Fixed a bug in the adapter info display.
+ If setup crashes, it can now send us a dump of the crash to help us fix
the problem.
+ Made the prioritization buttons in the current connections dialog
more responsive.
+ Added support to set priority if program name is "unknown" or "routed".
+ Link to features.htm on desktop is no longer created for prereleases.
Thanks to Sublogics and Contor for the idea.
+ Added "spd prioritize pair <program> <protocol> <class>" command to set
temporary prios for the program/protocol pair. The new Standard Current
Connections dialog now uses this command.
+ cFosSpeed setup will pop up a warning box if programs are running which are
known to cause (at least sometimes) problems when installing/deinstalling.
We recommend you close these programs before continuing the setup.
+ Added percentage display for resent packets in "spd netstat".
+ New current connections dialog.
+ Sending of usage reports added.
+ Added Unknown_Bulk l7-protocol with default priority.
+ Improved bulk detection; it should be more stable now. Please report if
there is unexpected behaviour.
+ Added -bulk, -tx-bulk, -rx-bulk filter expressions. They are true if any
direction, resp. direction rx, resp. direction tx is in bulk mode. Only
TCP connections can be in bulk mode, not UDP.
+ Improved HTTP Layer 7 detection. Now cFosSpeed also checks re-used
HTTP connections for streaming. This way especially Youtube videos
should be detected more reliably.
+ Added global variable min_hops. Usually, cFosSpeed will start with TTL 2
or 3 for ping timings and increase the TTL until a decent destination is
found. The min_hops setting can be used to force cFosSpeed to use a higher
minimum TTL. Thanks to Kullorki for inspiration.
+ Added a messagebox that is opened if cFosSpeed driver was not loaded.
This could happen when you upgrade your system from Windows 7 to Windows 8.
You need to reinstall cFosSpeed on Windows 8 to fix that.
x More trace output when the driver would not install.
x Added prioritization of program/protocol pair to Advanced Current
Connections dialog.
x Temporary prioritizations are now deleted when the Internet connection is
terminated or the machine is rebooted.
x Fixed a locking problem with multiple ports.
x Changed minimum speeds for bulk data detection to 30 kb/s rx and 6 kb/s tx.
Thanks to Michael32 for the hint.
x Temporary prioritizations will now affect newly created connects as well.
They are deleted if you manually override them or when the machine is
rebooted.
x When prioritizing a connection to lowest, it vanished from the list. Fixed.
x Fixed bug in checking of product news.
x Fixed a problem with Youtube bulk-sending with BSTREAM protocol (which is
set to "default" priority). The connection would be classified as "low".
In our protocol and program logic "default" means "fall-through" and then
the last -bulk rule changes the class to low. In general, this is intended,
but not with BSTREAM, so we excluded it from the -bulk rule. Thanks to
Ukjent for his report.
x Fixed bad ping values in "spd ts" display.
x Added a fix to avoid kernel stack exhaustion. Thanks to tonyhsie for report
and testing.
x Fixes in Setup to improve handling of rare update-installation issue:
On update install, Windows might report the need to reboot after removal of
the old cFosSpeed devices, before you can install them again. Setup now
honours this.
x Fixed bug where update install requires system reboot between uninstall and
install.
x Fixed printing of who opened our devices.
x Installer now keeps "Program Files" folder read-only as Microsoft requests.
x Fixed several crashes. Thanks to Burkhard Menzler and others for dump files.
x Some fixes to comply with Win8 logo tests.
x Fixed problems in current connections dialog with filename that contain
spaces.
x Fixed a Windows 8 bluescreen with DPC_WATCHDOG_VIOLATION (0x133). Thanks to
kittler2 for the dump files.
x Deinstallation will now work gracefully if driver was not installed, but
service was still installed.
- The Current Connections dialogs (old and new) now have the same application
ID as the options dialogs. Only one of them can be used at the same time.
This prevents overwriting prioritization settings from one dialog with
another when both dialogs would be open simultaneously.
- Switched to new compiler.
- Re-arranged context menu a bit. Removed the "Effects" menu. cFosSpeed now
always uses fade-in and slide animations. Also moved "Always on Top",
"Auto-Open", "Click Through" options to the "Window Settings" menu and made
them global for all windows.
- Unknown, Unknown_Bulk, Teredo and Teredo_Bulk l7-protocols all have default
priority. We recommend not to assign a different priority, because with
default priority the program prioritization will take care of it. And if
there is not entry for the program the final bulk rule will classify bulk
data as "low" and non-bulk as "default".
- Changes in column sorting in console dialog.
cFosSpeed v9.00 Build 2020 Final
cFosSpeed v9.00 Build 2020 Final
cFosSpeed v9.00 Build 2020 Final
