ATI Catalyst 10.6 WHQL 正式版發佈, 增強交火性能、影像播放能力

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
http://sites.amd.com/us/game/downloads/Pages/downloads.aspx

106nd.jpg


Video Playback
------------------------------
GPU acceleration of H.264 video content using Adobe Flash Player 10.1
 * AMD GPU acceleration of Adobe Flash Player 10.1 delivers smooth high definition video playback and reduces system resource utilization
 * Adobe Flash Player 10.1 can be accelerated on notebook and desktop platforms featuring AMD graphics including:
  o ATI Radeon HD 5000 and ATI Radeon HD 4000 series
  o ATI Mobility ATI Radeon HD 400 series (and higher)
  o ATI Radeon HD 3000 series integrated graphics (and higher)

Video De-blocking support
 * Reduces blocking artifacts seen in low-bit rate video during playback
 * Supported on the ATI Radeon HD 5000 Series of products

Mosquito noise reduction
 * Reduces mosquito noise seen in highly compressed progressive video, during playback
 * Supported on the ATI Radeon HD 5000 Series of products

Official support for OpenGL 4.0 and OpenGL 3.3
 * ATI Catalyst 10.6 delivers official support for OpenGL 4.0 on the ATI Radeon HD 5000 Series
 * ATI Catalyst 10.6 delivers official support for OpenGL 3.3 on the ATI Radeon HD Series


Gaming Improvements
------------------------------
3DMark Vantage
 * Overall scores improve up to 5% on a single ATI Radeon HD 5970

Batman: Arkham Asylum
 * Performance improves up to 5% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 10% on CrossFire ATI Radeon HD 5970 configurations

Aliens vs. Predator DirectX 11 Benchmark
 * Performance improves up to 4% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 10% on CrossFire ATI Radeon HD 5970 configurations
 * Performance improves up to 3% on CrossFire ATI Radeon HD 5700 Series products

Company of Heroes – DX10
 * Performance improves up to 7% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 5% with single card and CrossFire ATI Radeon HD 5970 configurations

Crysis Warhead
 * CrossFire performance improves by up to 7% on ATI Radeon HD 5000 Series products

DiRT 2 – DX9
 * Performance improves up to 10% on single card ATI Radeon HD 5800 Series products
 * Performance improves up to 10% on single card ATI Radeon HD 5970 configurations
 * Performance improves up to 4% on single card ATI Radeon HD 5700 Series products

The Chronicles of Riddick - Assault on Dark Athena
 * Performance improves up to 15% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 13% on CrossFire and single card ATI Radeon HD 5970 configurations
 * Performance improves up to 8% on CrossFire ATI Radeon HD 5700 Series products

Unigine Tropics
 * CrossFire performance improves by up to 8% on ATI Radeon HD 5000 Series products

World in Conflict
 * Performance improves up to 6% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 8% on CrossFire and single card ATI Radeon HD 5970 configurations

Wolfenstein
 * Performance improves up to 18% on CrossFire ATI Radeon HD 5800 Series products
 * Performance improves up to 18% on CrossFire and single card ATI Radeon HD 5970 configurations
 * Performance improves up to 11% on CrossFire ATI Radeon HD 5700 Series products
 

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
解決超頻後 PowerPlay 組態強迫切換至雙螢幕組態 (State3) 問題

目前解決辦法只在公板卡5870上測試過,非公板及其它型號未測試
跟我一樣覺得超頻後,待機頻率提升很不爽的,來試試看吧 :PPP:

(1) 直接修改最大時脈及電壓 (限定公板卡)
 (a) 修改後不能再使用 MSI Afterburner 調整時脈,一變動待機就會維持在 400/1250
 (b) 可以先啟用ATI Overdrive,過一會再取消,待機會還原回 157/300
i45039_10.505.PNG


(2) 若未使用雙螢幕,可以把雙螢幕的組態設定改掉
 (a) 修改後不能再使用 ATI Overdrive,一啟用必定馬上當機
 (b) 可以使用 MSI Afterburner 超頻,待機時脈依舊維持 157/300@0.95V
i45043_10.501.PNG

i45042_10.502.PNG


10.5a Hotfix 超頻後維持正常 157/300@0.95V
i45048_10.5aHotfixATI.Stream.v2.1OpenCL.1.0MSI.Afterburner9001250.png


單螢幕專用組態
i45041_10.503.PNG


硬解專用組態
i45040_10.504.PNG
 

eewqtw

初級會員
已加入
5/28/09
訊息
23
互動分數
0
點數
0
請問一下5770 這張卡 有軟體可以鎖定他的時脈嗎? 一直跳動很不方便@@?
 

ASATAIWAN

榮譽會員
已加入
5/9/07
訊息
3,748
互動分數
0
點數
0
用MSI AFTERBURNER 超頻,
將 MSIAfterburner.cfg 用 NOTEPAD(筆記本) 打開,

將下列兩個變這成這
如果沒有就自己加
[ATIADLHAL]
EnableUnofficialOverclocking = 1
AccessibilityCheckingPeriod = 1
 

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
請問一下5770 這張卡 有軟體可以鎖定他的時脈嗎? 一直跳動很不方便@@?
軟體的話,可以使用 ATI Tray Tools,它直接提供固定時脈的功能 (作者提供的官方載點:http://cid-a50350ea7a969f0c.skydrive.live.com/browse.aspx/ATI Tray Tools builds)
修改bios的話,把"單/雙螢幕/UVD"組態的「3D全速(紅色)、3D一般(黃色)、2D(綠色)」通通改成一個"相同的時脈",例如:750/1000

上面二個方式,等於把PowerPlay拿掉,時脈就不會跳動了
 

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
[ATIADLHAL]
EnableUnofficialOverclocking = 1
AccessibilityCheckingPeriod = 1

- Added AccessibilityCheckingPeriod configuration file switch for improving the
compatibility with AMD ULPS power saving technology on Crossfire systems. The
switch allows low-level monitoring module to use AMD driver API to check GPU
accessibility and detect and display GPU sleep state properly. Please take a
note that AMD API implementation is ineffective and hardly suits to realtime
monitoring due to high CPU stress resulting in periodic stuttering in games.

That is why the compatibility switch is disabled by default, enable it only
if you absolutely need to see slave GPU sleep state on the graphs and accept
side effects like performance drop and stuttering resulting from ineffective
AMD API implementation.


這是 MSI Afterburner 官方文件的說明,選項開啟主要是針對CF系統
也詳細說明了預設不開啟的原因,它會造成效能降低、增加頓感
 

狂少

Bulletproof Themer
已加入
9/18/03
訊息
14,397
互動分數
2
點數
0
- Added AccessibilityCheckingPeriod configuration file switch for improving the
compatibility with AMD ULPS power saving technology on Crossfire systems. The
switch allows low-level monitoring module to use AMD driver API to check GPU
accessibility and detect and display GPU sleep state properly. Please take a
note that AMD API implementation is ineffective and hardly suits to realtime
monitoring due to high CPU stress resulting in periodic stuttering in games.

That is why the compatibility switch is disabled by default, enable it only
if you absolutely need to see slave GPU sleep state on the graphs and accept
side effects like performance drop and stuttering resulting from ineffective
AMD API implementation.


這是 MSI Afterburner 官方文件的說明,選項開啟主要是針對CF系統
也詳細說明了預設不開啟的原因,它會造成效能降低、增加頓感

exactly,所以當你跑vantage g2時,你會頓好幾次,然後FPS狂降:)
 

ASATAIWAN

榮譽會員
已加入
5/9/07
訊息
3,748
互動分數
0
點數
0
所以???CF 關閉會比較穩???? 還是打開??? (不是很懂
 

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
所以???CF 關閉會比較穩???? 還是打開??? (不是很懂
它的意思是說打開選項後,對於CF系統可以增加"AMD ULPS power saving technology"相容性
簡單講就是開啟後,在監控多GPU狀態時能有較好的相容性
但負面的是你必須接受效能降低與頓感 ...

個人解讀原意是這樣子啦 :PPP:
有誤請指正 ;rr;
 
▌延伸閱讀