ASUS Striker Extreme 680i 簡單教學

[hyde211]

好文~~幫你推推

話說我也是新手....趁機學了一下 ;rr;

大家互相學習

:D

 

[hyde211]

按此下載

0901新版本出來囉！

有興趣可試試！

--
我總覺得會不會在去皇家一趟XD
希望不要:PPP:

 

[taco994]

好詳細的教學,真好

 

[hyde211]

BIOS version: 0901 Date:02/07/2007
Checksum: D400H

01.Modify Corsair CM2X1024-10000C5D & Corsair CM2X1024-6400C4D patch rule
02.Fixed FSB 1333Mhz CPU clock incorrect
03.Fixed sometime the CPU VID table will be dystroyed
04.Fixed Vcore error when CMOS checksum fail.
05.Fixed summary page "CPU ID/ucode ID" string will show to "CPU ID/uc"
06.Patch Corsair CM2X1024-6400C4D to fit H/W Request
07.Update EZ-Flash to B319 :
----a.Fixed error occurs when there is only a SATA ODD connected and legacy floppy is disable.
----b.Fixed if the last byte of the bios date is aligning on 16bytes
08.Fixed SETUP hang on when item position at "Internal Connector LED" in Triditional Chinese mode

 

[angel-ghost]

機殼真的蠻特別的!
雖然它不是此次的重點~

 

[hyde211]

目前更新0901 沒出現問題

先來個小超XD---以下設置

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Enabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1200 (means 300FSB)
Actual FSB (QDR), Mhz: 1200
MEM (DDR), Mhz: 800 (means 400mhz speeds)
Actual MEM (DDR), Mhz: 800

Vcore Voltage: 1.20
Memory Voltage: 1.850v
1.2v HT Voltage: 1.20v
NB Core Voltage: 1.20v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.20v
DDRII Controller Ref Voltage: DDR2_Vol/2
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 4
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: 1
tRC: 12
tWR: 3
tWTR: 6
tREF: 1
RD: 5
RFC:23
Async Latency: 1

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

 

[hyde211]

補圖：

燒機前

燒機中

 

[krizalid]

好文~~幫你推推

感謝分享

 

[ponpa]

那咖華碩的機殼真的很不錯看，我之前也很想敗，可惜我的桌子下面的置物架放不進去!!

 

[mms_air]

不錯的教學，謝謝大大的用心！

冒昧請問一下，MB上有很多發亮的LED，要在哪個選項打開或按開關才會亮，還是一開機就會亮，希望有人可以解答，我的不會發亮！