详细配置
CPU：INTEL E8200（盒）
FAN：ASUS V70
主板：ASUS MAXIMUS FORMULA（X38）
内存：MT DDR2-6400 1G*2
硬盘：ST250G 7200.10
显卡 ：影驰8800GS骨灰魔魂0.8ns 600/2000
电源：航嘉宽幅王350W
机箱：TT海啸侧透
键鼠：ZIPPY全铝合金无线套
光存储：PIONNER DVD-RW和DVD-ROM
LCD：三星961GW
超频BIOS设置(ASUS X38 R.O.G)
Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [550]
FSB Strap to North Bridge [Auto]
PCIE Frequency [100]
DRAM Settings: DDR2
DRAM Frequency DRAM Command Rate [1101]
DRAM Timing Control [Manual]
CAS# Latency [5]
RAS# to CAS Delay [5]
RAS# Precharge [5]
RAS# Active Time [12]
RAS# To Ras# Delay [3]
Row Refresh Cycle Time [35]
Write Recovery Time [4]
Read To Precharge Time [4]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [3]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Auto]
Transaction Booster [Auto]
Voltage Settings:
CPU Voltage [1.550v]
CPU PLL Voltage [1.70v]
North Bridge Voltage [1.73v]
DRAM Voltage [2.36v]
FSB Termination Voltage [1.50v]
South Bridge Voltage [Auto]
Loadline Calibration [Enabled]
CPU GTL Reference [Auto]
North Bridge GTL Reference [Auto]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [DDR2_REF]
SB 1.5V Voltage [Auto]
CPU：INTEL E8200（盒）
FAN：ASUS V70
主板：ASUS MAXIMUS FORMULA（X38）
内存：MT DDR2-6400 1G*2
硬盘：ST250G 7200.10
显卡 ：影驰8800GS骨灰魔魂0.8ns 600/2000
电源：航嘉宽幅王350W
机箱：TT海啸侧透
键鼠：ZIPPY全铝合金无线套
光存储：PIONNER DVD-RW和DVD-ROM
LCD：三星961GW
超频BIOS设置(ASUS X38 R.O.G)
Ai Overclock Tuner [Manual]
OC From CPU Level Up [Auto]
CPU Ratio Control [Manual]
Ratio CMOS Setting: [8]
FSB Frequency [550]
FSB Strap to North Bridge [Auto]
PCIE Frequency [100]
DRAM Settings: DDR2
DRAM Frequency DRAM Command Rate [1101]
DRAM Timing Control [Manual]
CAS# Latency [5]
RAS# to CAS Delay [5]
RAS# Precharge [5]
RAS# Active Time [12]
RAS# To Ras# Delay [3]
Row Refresh Cycle Time [35]
Write Recovery Time [4]
Read To Precharge Time [4]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [3]
Write To Read Delay(D) [5]
Read To Read Delay(S) [4]
Read To Read Delay(D) [6]
Write To Write Delay(S) [4]
Write To Write Delay(D) [6]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Auto]
Transaction Booster [Auto]
Voltage Settings:
CPU Voltage [1.550v]
CPU PLL Voltage [1.70v]
North Bridge Voltage [1.73v]
DRAM Voltage [2.36v]
FSB Termination Voltage [1.50v]
South Bridge Voltage [Auto]
Loadline Calibration [Enabled]
CPU GTL Reference [Auto]
North Bridge GTL Reference [Auto]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [DDR2_REF]
SB 1.5V Voltage [Auto]
