軟改 微星3870 512MB OC => AMD FireStream9170(價值倍增20倍)

[s1s184]

請問這一步要怎麼改，沒改過不曉得要用什麼程式來編輯，請大大再指點得清楚些，謝謝！

代答一下

要先安裝 RivaTuner v2.07（現在去抓是v2.08）

然後再用RivaTuner 去開FireGL_X2000up_cr8.44.rts 檔案

就會出現 那個畫面了

 

[tyraul]

我的MSI 3850也改成功了~~感謝大大的教學~~

 

[nybaao]

請問CCC也有專業選項可以出來嗎?

還是說不需要裝CCC?

謝謝

 

[alanyoungg]

代答一下

要先安裝 RivaTuner v2.07（現在去抓是v2.08）

然後再用RivaTuner 去開FireGL_X2000up_cr8.44.rts 檔案

就會出現 那個畫面了

感謝回覆，我再試試看！

 

[s1s184]

KKJACK:
請問一下
我看網路上有人說1950是要改7350
那請問是不是 下面這個 也要新增7350??
謝謝
----------------------------
ATI.Mfg.NTx86]
"ATI FireGL V3600" = ati2mtag_RV630GL, PCI\VEN_1002&DEV_9589
"ATI FireGL V5600" = ati2mtag_RV630GL, PCI\VEN_1002&DEV_9588
"ATI FireGL V7600" = ati2mtag_R600GL, ...

 

[kkjack]

KKJACK:
請問一下
我看網路上有人說1950是要改7350
那請問是不是 下面這個 也要新增7350??
謝謝
----------------------------
ATI.Mfg.NTx86]
"ATI FireGL V3600" = ati2mtag_RV630GL, PCI\VEN_1002&DEV_9589
"ATI FireGL V5600" = ati2mtag_RV630GL, PCI\VEN_1002&am...

報欠阿 來晚了 請修改
Driver 目錄下 CX_53876.INI、INSTALL.INI
修改成下列
CX_53876.INI
R6=DriverPath_R6,0x7173,0x712F,0x4174,0x4A4D,0x5B64,0x5E48,0x3E54,0x5551,0x7152,0x71D2,0x4A6D,0x71DA,0x5550,0x7104,0x958D,0x710E,0x7153,0x958C,0x5B74,0x5E68,0x3E74,0x7172,0x5571,0x710F,0x71FA,0x71F2,0x5570,0x4154,0x7124,0x7293,0x72B3,0x7291,0x72B1,0x7288,0x72A8,0x724B,0x726B,0x7249,0x7269,0x7280,0x72A0,0x7248,0x7244,0x7240,0x7268,0x7264,0x7260

INSTALL.INI
R6=DriverPath_R6,0x7173,0x712F,0x4174,0x4A4D,0x5B64,0x5E48,0x3E54,0x5551,0x7152,0x71D2,0x4A6D,0x71DA,0x5550,0x7104,0x958D,0x710E,0x7153,0x958C,0x5B74,0x5E68,0x3E74,0x7172,0x5571,0x710F,0x71FA,0x71F2,0x5570,0x4154,0x7124,0x7293,0x72B3,0x7291,0x72B1,0x7288,0x72A8,0x724B,0x726B,0x7249,0x7269,0x7280,0x72A0,0x7248,0x7244,0x7240,0x7268,0x7264,0x7260

 

[kkjack]

在修改 XP_INF 目錄下
"ATI FireGL V7350" = ati2mtag_R520GL, PCI\VEN_1002&DEV_710F
"ATI FireGL V7350 Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_712F
"ATI FireGL V7400 (X1650GT/XT)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7293
"ATI FireGL V7400 (X1650GT/XT) Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_72B3
"ATI FireGL V7400 (X1650GT/XT) = ati2mtag_R520GL, PCI\VEN_1002&DEV_7291
"ATI FireGL V7400 (X1650GT/XT) Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_72B1
"ATI FireGL V7400 (X1950GT)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7288
"ATI FireGL V7400 (X1950GT) Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_72A8
"ATI FireGL V7400 (X1900GT)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_724B
"ATI FireGL V7400 (X1900GT) Secondary " = ati2mtag_R520GL, PCI\VEN_1002&DEV_726B
"ATI FireGL V7400 (X1900)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7249
"ATI FireGL V7400 (X1900) Secondary " = ati2mtag_R520GL, PCI\VEN_1002&DEV_7269
"ATI FireGL V7400 (X1950Pro)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7280
"ATI FireGL V7400 (X1950Pro) Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_72A0
"ATI FireGL V7400 (X1950)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7248
"ATI FireGL V7400 (X1950)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7244
"ATI FireGL V7400 (X1950)" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7240
"ATI FireGL V7400 (X1950) Secondary" = ati2mtag_R520GL, PCI\VEN_1002&DEV_7268
"ATI FireGL V7400 (X1950) Secondary " = ati2mtag_R520GL, PCI\VEN_1002&DEV_7264
"ATI FireGL V7400 (X1950) Secondary " = ati2mtag_R520GL, PCI\VEN_1002&DEV_7260
"ATI FireGL X3-256" = ati2mtag_R420GL, PCI\VEN_1002&DEV_4A4D
"ATI FireGL X3-256 Secondary" = ati2mtag_R420GL, PCI\VEN_1002&DEV_4A6D

其實不必那麼多 一看就知到你要的市那兩行拉

 

[kkjack]

最後在用下面的腳本 選7400
http://www.FunP.net/2362061
修改這些部份 在照之前部奏 大功告成
<注意>因為你用之前腳本改過ati2mtag.sy_ 所以不能在用新腳本改
請還原為最原本的ati2mtag.sy_ 在用新腳本改

 

[vicy912]

有人試過改過的繪圖效能真的有增加嗎??

 

[bimotadb2]

最後在用下面的腳本 選7400
http://www.FunP.net/2362061
修改這些部份 在照之前部奏 大功告成
<注意>因為你用之前腳本改過ati2mtag.sy_ 所以不能在用新腳本改
請還原為最原本的ati2mtag.sy_ 在用新腳本改

修改上面兩項所提供的
再按這個腳本顯示金嘆號失敗耶～
大哥可以再確定那部份錯誤？
修改ｉｎｉ部份是不是有出錯？？