上禮拜從我朋友那弄了一台電腦來,我朋友說他不要了,本來想說
重灌就好,把這台給我姐姐用好了,沒想到...
我第一次重灌時,是用sp1的光碟 不知道是這塊光碟的問題還是....灌不進去= =
之後跟我朋友借的一塊sp2自動安裝的~重灌時很正常的運作 還有做磁碟分割
灌好後進入WINDOWS畫面之後竟然出現藍底白字 如下
A problem has been detected and windows has been shut down to
prevent damage to your computer.
UNMOUNTABLE_BOOT_VOLUME
If this is the first time you've seen this stop error screen
restart your computer.If this screen appears again,follow
these steps:
Check to make sure any new hardware or software is properly
installed.If this is a new installation,ask your hardware or
software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed
hardware or software.Disable BIOS memory options such as
caching or shadowing.If you need to use Safe Mode to remove
or disable components,restart your computer,press F8 to
select Advanced Startup Options,and then select Safe Mode.
***STOP:OxOOOOOOEDCOx8OE389DO,OxCOOOO14F,OxOOOOOOOO,OxOOOOOOOO
到底是怎樣阿= =+之後我又重灌一次 結果沒想到灌不進去 出現幾行英文字
File\XPM2\ntkrnlmp.exe could not be loaded
The error code is 7
Setup cannot continue.Press any key to exit
請問各位高手 問題到底出在哪阿>"<
重灌就好,把這台給我姐姐用好了,沒想到...
我第一次重灌時,是用sp1的光碟 不知道是這塊光碟的問題還是....灌不進去= =
之後跟我朋友借的一塊sp2自動安裝的~重灌時很正常的運作 還有做磁碟分割
灌好後進入WINDOWS畫面之後竟然出現藍底白字 如下
A problem has been detected and windows has been shut down to
prevent damage to your computer.
UNMOUNTABLE_BOOT_VOLUME
If this is the first time you've seen this stop error screen
restart your computer.If this screen appears again,follow
these steps:
Check to make sure any new hardware or software is properly
installed.If this is a new installation,ask your hardware or
software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed
hardware or software.Disable BIOS memory options such as
caching or shadowing.If you need to use Safe Mode to remove
or disable components,restart your computer,press F8 to
select Advanced Startup Options,and then select Safe Mode.
***STOP:OxOOOOOOEDCOx8OE389DO,OxCOOOO14F,OxOOOOOOOO,OxOOOOOOOO
到底是怎樣阿= =+之後我又重灌一次 結果沒想到灌不進去 出現幾行英文字
File\XPM2\ntkrnlmp.exe could not be loaded
The error code is 7
Setup cannot continue.Press any key to exit
請問各位高手 問題到底出在哪阿>"<