狂爺給大家聖誕節禮物啦!小弟拜讀了,感謝教導.
nightmare 進階會員 已加入 9/21/03 訊息 181 互動分數 2 點數 18 年齡 46 12/25/07 #13 我的問題只有雙核要上 500FSB 北橋一定要加壓到 1.85v 嗎?1.65v 溫度已經快 60℃了,再加上去會怕怕的...Orz
D DONALD.TAM 初級會員 已加入 12/11/07 訊息 2 互動分數 0 點數 0 年齡 36 12/25/07 #14 Thanks 狂大 Now i can run my system like this. bios.0907 ram 2.45v , nb 1.75v
狂少 Bulletproof Themer 已加入 9/18/03 訊息 14,397 互動分數 2 點數 0 12/25/07 #16 ya, thanks Hyde;) Donald;) very nice job there:) the key should be on the 2:3 or 5:6 divider + you set the good reference voltage number there:D Merry X'mas to everyone!!!
ya, thanks Hyde;) Donald;) very nice job there:) the key should be on the 2:3 or 5:6 divider + you set the good reference voltage number there:D Merry X'mas to everyone!!!
nightmare 進階會員 已加入 9/21/03 訊息 181 互動分數 2 點數 18 年齡 46 12/25/07 #17 真的是要多謝狂爺的教學啦.... 下面是小弟的設定: 雖然已經很滿意了,但是還是想問一下有沒有機會上 500FSB...>_<