[W7 撥放王者] PotPlayer 將領風騷

eLove

榮譽會員
已加入
4/5/08
訊息
1,394
互動分數
8
點數
38
madVR v0.78

* added support for DXVA2 deinterlacing
* added option to enable/disable automatic activation of deinterlacing
* added option to force off deinterlacing for 48i sources
* added option enable/disable performing deinterlacing in a separate thread
* added auto 4:2:2/4:4:4 to 4:2:0 conversion when using DXVA2 deinterlacing
* added OSD deinterlacing information
* Ctrl+Alt+Shift+D turns deinterlacing on/off
* Ctrl+Alt+Shift+F switches deinterlacing field order (auto, top, bottom first)
* changed gamma decrease key combo from Ctrl+Alt+Shift+F to Ctrl+Alt+Shift+B
* increased decoder queue size to 12 frames
* added support for h264 10bit 4:2:2 decoding
* improved frame stepping
* improved internal frame locking mechanism
* removed warning "creating 10bit render texture failed, used 8bit instead"
* updated libav/ffmpeg dlls
有需要硬體去交錯的,可以試試看
目前測試 MPEG2 編碼畫面會有閃爍、H.264 編碼畫面穩定
硬體去交錯的效果感覺上跟 ffdshow 開啟 yadif+double framerate 效果一樣

補上作者的說明:

added DXVA2 Deinterlacing

no support for DXVA2 Decoding, just to avoid any misunderstandings

Some things to note:

(1) Deinterlacing requires DXVA2 to be present. On XP you probably need to install .NET 3.0 (or higher) to get DXVA2.
(2) Using DXVA2 deinterlacing means that potentially all the nasty GPU algorithms like noise reduction and edge enhancement are introduced to madVR. So make sure you have all this stuff turned off in your GPU driver's control panel. Of course madVR only uses DXVA2 if deinterlacing is needed. So for progressive stuff (or if you deinterlace externally) nothing changes compared to older madVR versions.
(3) At this point in time madVR mostly does the same that VMR and EVR do. Which is not ideal in some cases. E.g. MPEG2 flags are trusted, so movie deinterlacing might not always be correct, especially with MPEG2 DVDs and broadcasts. I might improve that in a future version.
(4) madVR is less picky than other renderers about which color spaces you can send. madVR will happily deinterlace all 8bit YCbCr formats. Even 4:2:2 and 4:4:4, which madVR then converts down to 4:2:0 for DXVA2 deinterlacing.
(5) ATI users please activate the switch "Advanced Color -> Dynamic Range" and set it to "Limited (16 - 235)". This will make sure that BTB and WTW are not cut off by DXVA2 deinterlacing.
(6) I've removed the Intel software decoder DLL from the madVR zip in order to cut down the zip file size, and because most people probably use the libav decoders, anyway. If you want to use the Intel decoders, you can download the dll separately here. Just copy it to the madVR folder and the Intel decoders should start working again.
(7) This is a first experimental version, bugs are to be expected.

FEEDBACK:

I need to know...

(a) ... how deinterlacing quality and performance compares to LAV CUVID, could you please check that? If LAV CUVID looks or performs better, maybe there's room for me to improve, too.
(b) ... whether the option "perform deinterlacing in separate thread" makes things better or worse for you. Ideally I hope it will be better or worse for everybody so that I can then hard code the "right" setting and remove the option. On my PC it seems that having this option off works better for windowed mode, but having it on works better for exclusive mode.
 

TAS

"人"生淫家...
已加入
3/16/09
訊息
4,078
互動分數
32
點數
48
madVR 0.78試用一下感想就是...
跟之前一樣...有新增功能的話還是再等下一版比較穩定...

我對第5點比較有疑問...???why
(5) ATI users please activate the switch "Advanced Color -> Dynamic Range" and set it to "Limited (16 - 235)". This will make sure that BTB and WTW are not cut off by DXVA2 deinterlacing.
 
最後編輯:

pk466610

初級會員
已加入
7/31/11
訊息
45
互動分數
0
點數
0
0jobQ.png


Potplayer_1.5.30154
LAV_0.39
madVR_0.78

[Used Filter List]
(1) File Source (Async.)
(2) LAV Splitter
(3) LAV Video Decoder
(4) ffdshow raw video filter
(5) Video Codec/Transform
(6) Madshi Video Renderer
(7) LAV Audio Decoder
(8) Audio Codec/Transform
(9) ReClock Audio Renderer

[Video Information]
Video Codec:AVC1
Input type:NV12(12 bits)
Input size:1920 x 1080(1.78:1)
Output type:YV12(12 bits)
Output Size:1920 x 1080(1.78:1)
Frame Rate:29.92
BitRate: Unknown

[Audio Information]
Audio Codec:AAC(0xff)
Sample rate:44100 ->96000 samples / sec
Bit rate:0 ->24 bits / sample
Channels:2 ->3 channels
Bitrate: 127 kbps

各位救我一下吧!畫面一邊黑白、一邊像夜視畫面綠!我只不過更新了LAV&MadVR...救這樣了!冏!
 

TAS

"人"生淫家...
已加入
3/16/09
訊息
4,078
互動分數
32
點數
48
0jobQ.png


Potplayer_1.5.30154
LAV_0.39
madVR_0.78

[Used Filter List]
(1) File Source (Async.)
(2) LAV Splitter
(3) LAV Video Decoder
(4) ffdshow raw video filter
(5) Video Codec/Transform
(6) Madshi Video Renderer
(7) LAV Audio Decoder
(8) Audio Codec/Transform
(9) ReClock Audio Renderer

[Video Information]
Video Codec:AVC1
Input type:NV12(12 bits)
Input size:1920 x 1080(1.78:1)
Output type:YV12(12 bits)
Output Size:1920 x 1080(1.78:1)
Frame Rate:29.92
BitRate: Unknown

[Audio Information]
Audio Codec:AAC(0xff)
Sample rate:44100 ->96000 samples / sec
Bit rate:0 ->24 bits / sample
Channels:2 ->3 channels
Bitrate: 127 kbps

各位救我一下吧!畫面一邊黑白、一邊像夜視畫面綠!我只不過更新了LAV&MadVR...救這樣了!冏!

設定圖全部PO上來...

你把POT的內建Video Filter關掉看看...
 

pk466610

初級會員
已加入
7/31/11
訊息
45
互動分數
0
點數
0
設定圖全部PO上來...

你把POT的內建Video Filter關掉看看...
哪些設定圖呀?POT的哪些頁面?(太多不知道您是要看哪個?)

我試過把內建的Video Filter關閉沒有用!

對了!補充一下我是AMD(ATi)的顯示卡,6870。

感謝您耐心的幫忙!
 

TAS

"人"生淫家...
已加入
3/16/09
訊息
4,078
互動分數
32
點數
48
哪些設定圖呀?POT的哪些頁面?(太多不知道您是要看哪個?)

我試過把內建的Video Filter關閉沒有用!

對了!補充一下我是AMD(ATi)的顯示卡,6870。

感謝您耐心的幫忙!

Potplayer_1.5.30154
LAV_0.39
madVR_0.78

以上跟Video Filter和Spiltter有關的部分

madVR試試用回0.77看看
 

pk466610

初級會員
已加入
7/31/11
訊息
45
互動分數
0
點數
0
Potplayer_1.5.30154
LAV_0.39
madVR_0.78

以上跟Video Filter和Spiltter有關的部分

madVR試試用回0.77看看

了解!
我已經試過用回MadVR0.77,但解果相同,畫面依然是如此~傻!

至於設定圖,我會找時間趕快弄上po上來的!

謝謝您的幫忙~!!!
 

princewang8

高級會員
已加入
4/24/10
訊息
730
互動分數
0
點數
0
了解!
我已經試過用回MadVR0.77,但解果相同,畫面依然是如此~傻!

至於設定圖,我會找時間趕快弄上po上來的!

(4) ffdshow raw video filter

try 拿掉........




.
 

TAS

"人"生淫家...
已加入
3/16/09
訊息
4,078
互動分數
32
點數
48
(4) ffdshow raw video filter

try 拿掉........




.

喔對
如果用POT + madVR + LAV + SVP的話
不用裝K-LITE
直接裝最新版FFDShow就好了(不必為了 ffdshow raw video filter還得裝那麼大的K-LITE)
 

pk466610

初級會員
已加入
7/31/11
訊息
45
互動分數
0
點數
0
(4) ffdshow raw video filter

try 拿掉........

.

哇!您太神了!我連設定圖都還沒有拍好,就知道怎麼用了!

拿掉 ffdshow raw video filter就沒事了!

不過拿到那個後,我又有一個疑問了!
這樣我怎用SVP???哭~~~
 
▌延伸閱讀