請問我裝vista裝到一半為何會出現藍底白字?

[jackie0213tw]

請問我裝vista裝到一半為何會出現藍底白字?

我這台電腦是這幾天才剛組好的(有拿去給電腦工司檢查過說甚麼記憶體配置問題)
我的組機
cpu i7 920
mb 技嘉 ga ex58 ud4p (bios新板F8)
ram ocz 1600白金板 3 x 2
vga 技嘉 4850 1g
power be quiel 550w
hdd wd 320g(stat)*1 wd 80g(ide)*1 sg 80g(ide)*1
320g為系統碟

為何我裝vista裝到一半就出現藍底白字

訊息:
A problem has been detected and windows has been shut down to prevent damage
to your computer.

The system encountered an uncorrectable hardware error.

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware of software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.

If problems continue, disable of remove any newly installed hardware
of software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical information:

*** STOP: 0x00000124 (0x0000000000000000 , 0FFFFFA800186CFA8 , 0X00000000BE000000 , 0X000000000030014A)

我也有記憶體拔掉裝一條測過也一樣

XP有時也會重新開機,請問會是計憶體衝突嗎?

希望知道的大大可以幫忙解決 謝謝!

 

[hkg1230]

我這台電腦是這幾天才剛組好的(有拿去給電腦工司檢查過說甚麼記憶體配置問題)
我的組機
cpu i7 920
mb 技嘉 ga ex58 ud4p (bios新板F8)
ram ocz 1600白金板 3 x 2
vga 技嘉 4850 1g
power be quiel 550w
hdd wd 320g(stat)*1 wd 80g(ide)*1 sg 80g(ide)*1
320g為系統碟

為何我裝vista裝到一半就出現藍底白字

訊息:
A problem has been detected and windows has been shut down to prevent damage
to your computer.

The system encountered an uncorrectable hardware error.

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware of software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.

If problems continue, disable of remove any newly installed hardware
of software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical information:

*** STOP: 0x00000124 (0x0000000000000000 , 0FFFFFA800186CFA8 , 0X00000000BE000000 , 0X000000000030014A)

我也有記憶體拔掉裝一條測過也一樣

XP有時也會重新開機,請問會是計憶體衝突嗎?

希望知道的大大可以幫忙解決 謝謝!

技嘉GA-EX58-UD4P的QVL
http://www.gigabyte.tw/FileList/MemorySupport/motherboard_memory_ga-ex58-ud4p.pdf

你的OCZ 2G不在列表上面，不過通常即使不在列表上面的記憶體應該還是相容；真的要確認問題的話，就是看能不能借到或買的列表上的記憶體；不然試著換個顏色的記憶體插槽試試看。感覺是比較像記憶體的問題。

 

[authenticamd]

偶的經驗是：超頻超過頭了。

 

[毒藥]

RAM有問題居多.........以前的經驗都是這樣子..........

 

[逍遙悠]

有沒有用預設的電壓下去安裝呢?

RAM先差一條試試看

我會有這種情形 是 超過頭@@

 

[cyzcamera]

百分百超頻不穩現象，這也是測電腦穩不穩的好方法喔！
但大都是RAM的問題居多...

 

[NBAZIPSHE]

我也發生過類似問題XP灌不進去換掉RAM就OK囉

 

[BOT-S1]

STOP: 0x00000124 應該是PCI / PCI-E問題