- 已加入
- 9/16/08
- 訊息
- 5
- 互動分數
- 0
- 點數
- 0
主機板:MSI P35-NEO2-FR
CPU:E6750
記憶體:創見DDR2 800*2
燒機時出現一個很奇怪的問題
當我CPU跑400*8時
CPU:1.35V
RAM、VTT和NB都用預設沒加壓
記憶體跑5:6 = ddr2 960
燒機沒問題
可是我換成450*8
CPU:1.4V
VTT:1.35V
NB:1.6V
RAM電壓:2.1V
記憶體才跑1:1 =DDR2 900
燒機兩秒就出現這個訊息:
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 2 seconds - 1 errors, 0 warnings.
Execution halted.
問題很奇怪~~記憶體跑960 可以跑~~為什麼跑900就不能跑@@?
CPU:E6750
記憶體:創見DDR2 800*2
燒機時出現一個很奇怪的問題
當我CPU跑400*8時
CPU:1.35V
RAM、VTT和NB都用預設沒加壓
記憶體跑5:6 = ddr2 960
燒機沒問題
可是我換成450*8
CPU:1.4V
VTT:1.35V
NB:1.6V
RAM電壓:2.1V
記憶體才跑1:1 =DDR2 900
燒機兩秒就出現這個訊息:
Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 2 seconds - 1 errors, 0 warnings.
Execution halted.
問題很奇怪~~記憶體跑960 可以跑~~為什麼跑900就不能跑@@?