有網兄會改MSI K8N Neo2 主機板的嗎?

極速狂飆

版面管理員
已加入
1/12/04
訊息
1,857
互動分數
0
點數
36
隢��雯���拙�撘MSI K8N Neo2 (Vcore Vddr Vio)
撠�憿隞�閬�鞎餌!!
�€靘���閮?#33;!銝�� ;cr;
 

7.62mm (Ken)

榮譽會員
已加入
9/18/03
訊息
1,933
互動分數
0
點數
0
網站
forum.coolaler.com
璆菟€之隞?閬靽�瑟鋆憭芰征璇迥~~ :sun:

���箏�剖皛游末鈭?�芸����W銝��?撟思�銝�... ;rr;

雿�!撟急蝮賣閬輕!

�祈���賭犖�啣ㄚ,�勗�憭扯�,雓�憭批振~~~ :MMM:
 

極速狂飆

版面管理員
已加入
1/12/04
訊息
1,857
互動分數
0
點數
36
Originally posted by 7.62mm (Ken)@Oct 19 2004, 02:24 PM
璆菟€之隞?閬靽�瑟鋆憭芰征璇迥~~ :sun:

���箏�剖皛游末鈭?�芸����W銝��?撟思�銝�... ;rr;

雿�!撟急蝮賣閬輕!

�祈���賭犖�啣ㄚ,�勗�憭扯�,雓�憭批振~~~ :MMM:
�典恥瘞��!!
�函鞎Y�臬�X€抒! :MMM:
 

0916106176

榮譽會員
已加入
4/7/04
訊息
1,883
互動分數
0
點數
0
網站
造訪網站
��憭拇��€?.��踹�鞈���?.
銝��皜祈岫
����撠梁�?:PPP:
 

gameguy

高級會員
已加入
1/10/04
訊息
789
互動分數
0
點數
0
http://www.xtremesystems.org/forums/showth...7806#post567806

鋆⊿
"OK, I've done several mods.
I expect that FET(Q20) generates Vdd(chipset voltage) and
FET(Q17) generates Vht(HyperTransport voltage), and now
both voltage are controllable

Vddr-mod(step2) also works fine. I've confirmed that Vddr
can be set upto 3.65V, though it depends on Vio.
In case of Vddr=3.65V, Vio is over 3.8V

Vcore is controlled by ISL6559, so mod is easy, as usual.
Connect Pin#10 and Pin#15 by 50k~25kOhm VR.
------------------------------------------------------------------------------------------
K8N Neo2 �車�寥€(憭抒捂銋撥�砌蔗�砌蔗)
http://219.113.251.125/c-board/c-board.cgi...one;no=2990;id=
------------------------------------------------------------------------------------------
�絲靘末���塚��€敺��撐�航��桀���箔��券銝����塚�銝餅��踵���a€見�€?
 

0916106176

榮譽會員
已加入
4/7/04
訊息
1,883
互動分數
0
點數
0
網站
造訪網站
Originally posted by gameguy@Oct 23 2004, 01:34 AM
http://www.xtremesystems.org/forums/showth...7806#post567806

鋆⊿
"OK, I've done several mods.
I expect that FET(Q20) generates Vdd(chipset voltage) and
FET(Q17) generates Vht(HyperTransport voltage), and now
both voltage are controllable

Vddr-mod(step2) also works fine. I've confirmed that Vddr
can be set upto 3.65V, though it depends on Vio.
In case of Vddr=3.65V, Vio is over 3.8V

Vcore is controlled by ISL6559, so mod is easy, as usual.
Connect Pin#10 and Pin#15 by 50k~25kOhm VR.
------------------------------------------------------------------------------------------
K8N Neo2 �車�寥€(憭抒捂銋撥�砌蔗�砌蔗)
http://219.113.251.125/c-board/c-board.cgi...one;no=2990;id=
------------------------------------------------------------------------------------------
�絲靘末���塚��€敺��撐�航��桀���箔��券銝����塚�銝餅��踵���a€見�€?
�?�€�...��蝬脣�€���?;lik;
�末��?憟賢銝�望 :PPP: )
 

mp07702

榮譽會員
已加入
5/11/04
訊息
1,979
互動分數
0
點數
36
年齡
43
Originally posted by 0916106176+Oct 23 2004, 01:39 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (0916106176 @ Oct 23 2004, 01:39 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-gameguy@Oct 23 2004, 01:34 AM
http://www.xtremesystems.org/forums/showth...7806#post567806

鋆⊿
"OK, I've done several mods.
I expect that FET(Q20) generates Vdd(chipset voltage) and
FET(Q17) generates Vht(HyperTransport voltage), and now
both voltage are controllable

Vddr-mod(step2) also works fine. I've confirmed that Vddr
can be set upto 3.65V, though it depends on Vio.
In case of Vddr=3.65V, Vio is over 3.8V

Vcore is controlled by ISL6559, so mod is easy, as usual.
Connect Pin#10 and Pin#15 by 50k~25kOhm VR.
------------------------------------------------------------------------------------------
K8N Neo2 �車�寥€(憭抒捂銋撥�砌蔗�砌蔗)
http://219.113.251.125/c-board/c-board.cgi...one;no=2990;id=
------------------------------------------------------------------------------------------
�絲靘末���塚��€敺��撐�航��桀���箔��券銝����塚�銝餅��踵���a€見�€?
�?�€�...��蝬脣�€���?;lik;
�末��?憟賢銝�望 :PPP: ) [/b][/quote]
��€閬�憭抒�除..��閬��甇餌瘙箏�..����府撠望�靽鈭?..

撘�箄:http://www.xtremesystems.org/forums/attach...achmentid=16902
 

極速狂飆

版面管理員
已加入
1/12/04
訊息
1,857
互動分數
0
點數
36
Originally posted by gameguy@Oct 23 2004, 01:34 AM
http://www.xtremesystems.org/forums/showth...7806#post567806

鋆⊿
"OK, I've done several mods.
I expect that FET(Q20) generates Vdd(chipset voltage) and
FET(Q17) generates Vht(HyperTransport voltage), and now
both voltage are controllable

Vddr-mod(step2) also works fine. I've confirmed that Vddr
can be set upto 3.65V, though it depends on Vio.
In case of Vddr=3.65V, Vio is over 3.8V

Vcore is controlled by ISL6559, so mod is easy, as usual.
Connect Pin#10 and Pin#15 by 50k~25kOhm VR.
------------------------------------------------------------------------------------------
K8N Neo2 �車�寥€(憭抒捂銋撥�砌蔗�砌蔗)
http://219.113.251.125/c-board/c-board.cgi...one;no=2990;id=
------------------------------------------------------------------------------------------
�絲靘末���塚��€敺��撐�航��桀���箔��券銝����塚�銝餅��踵���a€見�€?
3Q!!
撠��餅蝝Y�?#33;!�函�勗���典� ;cr;

鈭行雓�Y恣�之�亦蔭�?#33;!3Q
 

0916106176

榮譽會員
已加入
4/7/04
訊息
1,883
互動分數
0
點數
0
網站
造訪網站
撠望蝯虫����餅 ;ya;
 

極速狂飆

版面管理員
已加入
1/12/04
訊息
1,857
互動分數
0
點數
36
Originally posted by 0916106176@Oct 24 2004, 02:21 AM
撠望蝯虫����餅 ;ya;
�冽憟訶�?#33;!�剖�餃����?#33;!
���找��賭�銝!!憭抒捂���摨虫�憟?;ru;
 
▌延伸閱讀