First of all, congratulations to the opening of CBB English Hardware Discussion Board.
Nowadays I am concentrating more on my works so I put less effort on extreme overclocking as I need a total stable working environment.
Although the hardware components used in this rig are quite outdated comparing to most of the seniors here, but they are quite sufficient for my daily works and gaming requirements.
In this rig, I have put 5 x 120mm casing fans.
The rpm of each fans are controlled by Vantec Nexus 5.25" fan Controller and the dBA wont exceed 30dBA.
120mm fan can produce less high pitch sound whilst providing large amount of airflow to cool down my Harddisks and VGA Card.
The Heatsink used for CPU is Thermaltake Pipe101 with 60 copper fins and 4 heatpipes.
A Sunon 2500rpm 92mm CPU Fan is used to suck out hot air.
btw, merely Zalman Heatpipe Heatsink without active cooling fanan is used for the Radeon 9800XT.
TestBed:
AMD Mobile Athlon 64 3400+ 2.4GHz CG @ 8 x 300MHz 1.6v
Thermaltake Pipe101 Heatsink with 92mm Sunon 2800rpm Fan (Suck Air)
2 x 512MB KVR Winbond CH-6 DDR SDRAM
DFI LanParty nf3 250GB UT Tictac Modded BIOS DFI-NF3LD504-R1 with VDIMM upto 4v
Enlight True Power 420W PSU
Medion ATI Radeon 9800XT 128MB 256bit @ core 444MHz / mem 378MHz
Hitachi 37GB 15000rpm SCSI U320 HDD @ Adaptec 29320LP-R
2 x 40GB Western Digital WD400BB Raid-0 on NF3 Raid
300GB Maxtor DiamonMax Plus 10 7200rpm SATA150 16MB Cache HDD
Various Setting:
Vcore 1.58v (actual 1.6v)
Vdimm 3.2v (actual 3.19v)
Vdd 1.6v
Vagp 1.5v
Memory Divider @ 166MHz 1T Command CPC Enabled
4-Bank Interleave Enabled
Mobile AMD Athlon64 3400+ S754 1MB CPU Snapshots
DFI LanParty nf3 250GB UT Motherboard
Medion Radeon 9800XT 128MB 256bit AGP8x
Kingston Value RAM 2 x 512MB Winbond CH-6
Hitachi 37GB 15000rpm U320 HDD
Adaptec 29320-LP-R
Testbed
From the snapshots here, rear and top 120mm casing fans are put as exhaust position; side panel window are attached with 2 x 120mm intake fans; 1 x 120mm intake fan is attached in front to cool down the HDD rack.
Benchmark Screenshots:
Memtest86+ v1.51 Test5 Starting...
Memtest86+ v1.51 Test5 Stable ;nq;
CPU-Z, Crystal CPUID, SuperPi 1MB Calculation & CPUMark99
ITE Smartguardian Temperature Monitoring
SiSoft Sandra Various Benchmark Results
3DMark 2001
Futuremark Project Comparison Link
Nowadays I am concentrating more on my works so I put less effort on extreme overclocking as I need a total stable working environment.
Although the hardware components used in this rig are quite outdated comparing to most of the seniors here, but they are quite sufficient for my daily works and gaming requirements.
In this rig, I have put 5 x 120mm casing fans.
The rpm of each fans are controlled by Vantec Nexus 5.25" fan Controller and the dBA wont exceed 30dBA.
120mm fan can produce less high pitch sound whilst providing large amount of airflow to cool down my Harddisks and VGA Card.
The Heatsink used for CPU is Thermaltake Pipe101 with 60 copper fins and 4 heatpipes.
A Sunon 2500rpm 92mm CPU Fan is used to suck out hot air.
btw, merely Zalman Heatpipe Heatsink without active cooling fanan is used for the Radeon 9800XT.
TestBed:
AMD Mobile Athlon 64 3400+ 2.4GHz CG @ 8 x 300MHz 1.6v
Thermaltake Pipe101 Heatsink with 92mm Sunon 2800rpm Fan (Suck Air)
2 x 512MB KVR Winbond CH-6 DDR SDRAM
DFI LanParty nf3 250GB UT Tictac Modded BIOS DFI-NF3LD504-R1 with VDIMM upto 4v
Enlight True Power 420W PSU
Medion ATI Radeon 9800XT 128MB 256bit @ core 444MHz / mem 378MHz
Hitachi 37GB 15000rpm SCSI U320 HDD @ Adaptec 29320LP-R
2 x 40GB Western Digital WD400BB Raid-0 on NF3 Raid
300GB Maxtor DiamonMax Plus 10 7200rpm SATA150 16MB Cache HDD
Various Setting:
Vcore 1.58v (actual 1.6v)
Vdimm 3.2v (actual 3.19v)
Vdd 1.6v
Vagp 1.5v
Memory Divider @ 166MHz 1T Command CPC Enabled
4-Bank Interleave Enabled
Mobile AMD Athlon64 3400+ S754 1MB CPU Snapshots
DFI LanParty nf3 250GB UT Motherboard
Medion Radeon 9800XT 128MB 256bit AGP8x
Kingston Value RAM 2 x 512MB Winbond CH-6
Hitachi 37GB 15000rpm U320 HDD
Adaptec 29320-LP-R
Testbed
From the snapshots here, rear and top 120mm casing fans are put as exhaust position; side panel window are attached with 2 x 120mm intake fans; 1 x 120mm intake fan is attached in front to cool down the HDD rack.
Benchmark Screenshots:
Memtest86+ v1.51 Test5 Starting...
Memtest86+ v1.51 Test5 Stable ;nq;
CPU-Z, Crystal CPUID, SuperPi 1MB Calculation & CPUMark99
ITE Smartguardian Temperature Monitoring
SiSoft Sandra Various Benchmark Results
3DMark 2001
Futuremark Project Comparison Link
