小弟是個電腦白痴，但最近狂藍屏
完全不知該如何是好，請各位大大協助
附藍屏的圖檔以下
*************************
以XP模式藍屏重現文字
*************************
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa8007fc4028, 0x00000000b658a000,
0x0000000033000135)
*** hal.dll - Address 0xfffff80004229a3b base at 0xfffff80004217000 DateStamp
0x4ce7c669
*****************************************************************
完全不知該如何是好，請各位大大協助
附藍屏的圖檔以下
*************************
以XP模式藍屏重現文字
*************************
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: hal.dll
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa8007fc4028, 0x00000000b658a000,
0x0000000033000135)
*** hal.dll - Address 0xfffff80004229a3b base at 0xfffff80004217000 DateStamp
0x4ce7c669
*****************************************************************
